Removing the collected water, Continuous drain

Removing the collected water

There are two ways to remove the collected water.

1.Manual drain

∙When the unit is off and the bucket is full, the unit will beep 8 times and the Bucket Level indicator light will flash, the digital display will also indicate P2.

∙When the unit is on and the bucket is full, the compressor shuts off but the fan runs for an additional 30 seconds to dry any moisture on the condenser. The unit will then beep 8 times and the Bucket Level indicator light will flash, the digital display will also indicate P2.

∙Slowly pull out the bucket. (Fig 5) Grip the left and right handles securely, carefully pull the bucket out to prevent water spillage. (Fig 6) Do not put the bucket on the floor as the bottom of the bucket is uneven and it may tip.

∙Dispose the water (Fig 7) and reinstall it to the dehumidifier. The bucket must be installed securely for the unit to operate.

∙The unit will restart when the bucket is restored in its correct position.

NOTES:

∙When the bucket is removed, do not touch any parts inside of the unit. Doing so may damage the unit.

∙Be sure to push the bucket gently all the way into the unit. Hitting the bucket against anything or failing to push it in securely may cause the unit to malfunction.

∙When the bucket is removed, check if there is any excess water at the base of the unit. Wipe any visible water inside the unit before replacing the bucket.

2.Continuous drain

Water can be automatically emptied into a floor

drain by attaching the unit with a water hose(24mm) (included).

∙Remove the water bucket from the unit and set aside.

∙Lift up the Darin Hose Outlet cover located on the right side of the unit (Fig.8)

∙Insert the female threaded end of the hose to the Drain Hose Outlet. (Fig.9a)

∙Grip the hose from inside the unit and screw the hose onto the threaded portion of the tray located in the bucket opening.(Fig.9b)

∙Make sure the hose is securely fastened to prevent leakage. Direct the hose toward a drain or other suitable drainage outlet. Make sure that there are no distortions with the hose that may stop the water flow.

∙Reinsert the water bucket back in the unit and make sure that it is inserted securely.(Fig.9c)

∙Select the desired humidity setting and fan speed on the unit for continuous draining to start.

NOTE: If the unit stops operating, check if the Bucket Level light is illuminated. If it is, remove the bucket and empty the water and then check the seal between the hose and the drip tray. If there is a leak, replace the hose gasket and re-tighten the hose.

1. Pull the bucket out carefully.

Fig.5

2.Hold both sides of the bucket evenly and pull it

out from the unit completely.

3.Pour the water out.

Fig.7

11 P a g e

RPD-410W specifications

The Whynter RPD-410W is an advanced portable dual zone refrigerator and freezer, designed to meet the needs of both outdoor enthusiasts and everyday users who require efficient food storage solutions. This innovative refrigerator/freezer combo is particularly ideal for camping trips, tailgating, or even for use at home when additional refrigeration is needed.

One of the main features of the RPD-410W is its dual zone capability. It is designed with two compartments that can be independently set to different temperatures, providing the versatility of having one section operate as a refrigerator and the other as a freezer. This allows users the flexibility to store frozen goods alongside fresh produce and dairy products without compromising storage needs.

The unit operates efficiently using advanced compressor technology, which ensures that it can maintain consistent temperatures even in harsh conditions. The RPD-410W has a temperature range that can be adjusted between -8°F (-22°C) up to 50°F (10°C), giving users the ability to freeze items solid or keep beverages perfectly chilled.

Another significant characteristic of the Whynter RPD-410W is its energy efficiency. The appliance is designed to consume minimal power, making it an eco-friendly option for long trips or continuous use. With a low power consumption, it is well-suited for operation with solar panels or car batteries, making it an excellent choice for off-grid adventures.

Portability is also a key feature of the RPD-410W, with its lightweight construction and built-in handles designed for easy transportation. The unit is also equipped with wheels for added mobility, ensuring that it can be moved with ease, whether you are setting up camp or rearranging your space at home.

Additionally, the RPD-410W features an easy-to-use digital control panel, giving users intuitive access to temperature settings and configurations. Its robust design ensures durability while maintaining an attractive aesthetic appeal.

In conclusion, the Whynter RPD-410W stands out for its dual zone capability, energy efficiency, portability, and user-friendly design. This versatile appliance is perfect for those who appreciate the convenience of having both refrigeration and freezing capabilities in a single unit, making it a fantastic addition for anyone's outdoor or home needs.