Troubleshooting

Problem	Possible Causes	Solutions

The portable air conditioner does	Power failure / outage.	Restore the power supply.
not turn on	The automatic switch, line fuse, or breaker has	Flip the switch / change the fuse / turn the breaker back on. Also note
	The automatic switch, line fuse, or breaker has
	been tripped.	that you may have too many appliances drawing power on one circuit,
		you may need to move the other appliances to another circuit.
	The power supply voltage is too low.	Move the unit onto another circuit with the correct voltage.
	The power supply voltage is too low.	Call for service. Only authorized personnel should replace damaged
	The power cord is damaged.
	The power cord is damaged.	power cord or power plug.
	The L.C.D.I. power plug for the unit is tripped.	Press the Reset button on the L.C.D.I. power plug.
	The L.C.D.I. power plug for the unit is tripped.
	The internal water reservoir is full.	Manually drain the water by removing the drain plug.
The unit turns on but the	The room temperature is outside of the	This unit is designed to work in ambient temperatures of 61°F to 100°F.
compressor does not turn on (the	operational tolerances of the unit.	Press the MODE button until the Cooling icon is shown on the display.
fan runs but the unit is not	The Cooling mode is not on.
cooling)	The Cooling mode is not on.	Give the compressor 3 minutes to turn on after the Cooling mode has

	The compressor has not turned on yet	been selected.
	The compressor has not turned on yet
	because of its time delay.	Set the air conditioner to a lower temperature. It is recommended to set
	The set temperature is too high.	the temperature to at least 5°F of the ambient temperature.
	The set temperature is too high.	Either manually drain the water by removing the drain plug or allow the

		unit to exhaust the water itself by running the fan only mode. Then
	The internal water reservoir is full.	cooling will resume.
	The internal water reservoir is full.	Cancel the automatic function mode and manually set the temperature

		to at least 5°F below the ambient temperature.
	The unit is set to Automatic (Comfort) mode.
The air coming out of the unit is	The filter is dirty or obstructed.	Clean the air filter.
not very cold, or the airflow
volume is weak	The air intake or exhaust is obstructed.	Make sure there is at least 20" of clearance from the air intake.
	.	Make the length of the exhaust hose is as short as possible.
	The unit is set in dehumidifying or fan mode.	Set the unit to the cooling mode.

ARC-13PG specifications

The Whynter ARC-13PG is a versatile air conditioning unit that brings comfort and convenience to any indoor environment. This portable unit is designed to deliver effective cooling while being easy to use and maintain, making it an attractive option for both residential and commercial settings.

One of the standout features of the ARC-13PG is its impressive cooling capacity. With a 13,000 BTU rating, this unit can effectively cool rooms of up to 500 square feet, ensuring a comfortable atmosphere even during the hottest days of summer. It uses environmentally friendly refrigerant R-410A, which not only protects the ozone layer but also enhances the unit's cooling efficiency.

The Whynter ARC-13PG is equipped with a built-in dehumidifier that can remove up to 78 pints of moisture from the air within a 24-hour period. This dual-functionality helps to reduce humidity levels, preventing mold and mildew growth while improving overall air quality. The unit also has a three-speed fan and an adjustable thermostat to customize the cooling experience according to individual preferences.

Mobility is another significant advantage of the ARC-13PG. With built-in caster wheels and a lightweight design, moving the unit from room to room is effortless. Additionally, the installation is streamlined; the unit comes with a comprehensive window kit that allows for easy setup in most standard window frames.

For added convenience, the ARC-13PG features an intuitive remote control system, allowing users to operate the unit from a distance. Its 24-hour programmable timer helps save energy by allowing users to schedule cooling times without having to adjust settings manually.

The unit’s sleek and modern design does not compromise its functionality. The washable pre-filter and activated carbon filter capture dust and odors, helping to maintain a cleaner indoor environment. With user-friendly controls, including LED indicators, the ARC-13PG emphasizes simplicity and ease of use.

Lastly, the Whynter ARC-13PG is designed with energy efficiency in mind, boasting a 24.2 EER rating, which translates to lower electricity bills over time. This combination of features makes it an excellent choice for those seeking a reliable and cost-effective portable air conditioning solution.

TROUBLESHOOTING

Problem

Possible Causes

Solutions

ARC-13PG specifications