Whynter ARC-08WB instruction manual Troubleshooting, Problem Possible Causes Solutions

Page 19

TROUBLESHOOTING

Problem

Possible Causes

 

Solutions

 

 

 

 

The portable air

 Power failure / outage

 

 Restore the power supply

conditioner does not

 The automatic switch, line

 

 Flip the switch / change the fuse / turn the

turn on

fuse, or breaker has been

 

breaker back on. Also note that you may have

 

tripped

 

too many appliances drawing power on one

 

 

 

circuit, you may need to move the other

 

 The power supply voltage is

 

appliances to another circuit

 

 

 Move the unit onto another circuit with the

 

too low

 

correct voltage

 

 The power cord is damaged

 

 Call for service. Only authorized personnel

 

 

 

should replace damaged power cord or power

 

 The L.C.D.I. power plug for

 

plug

 

 

 Press the Reset button on the L.C.D.I. power

 

the unit is tripped

 

plug

 

 The internal water reservoir

 

 Drain water from the air conditioner

 

is full and ‘P1” appears on

 

 Possible loose internal connection. Please

 

display

 

contact Whynter for service

 

 

 

 

The unit turns on but

 The room temperature is

 

 This unit is designed to work in ambient

the compressor does

outside of the operational

 

temperatures of 64°F to 90°F

not turn on (the fan runs

tolerances of the unit

 

 

but the unit is not

 The Cooling mode is not on

 

 Press the MODE button until the COOL light is

cooling)

 The compressor has not

 

shown on the display

 

 

 Give the compressor 3 minutes to turn on after

 

turned on yet because of its

 

the Cooling mode has been selected

 

time delay

 

 

 

 The set temperature is too

 

 Set the air conditioner to a lower temperature.

 

high

 

It is recommended to set the temperature to at

 

 

 

least 5°F of the ambient temperature

 

 The internal water reservoir

 

 Either manually drain the water by removing

 

 

the drain plug or allow the unit to exhaust the

 

is full and ‘P1” appears on

 

water itself by running the fan only mode.

 

display

 

Then cooling will resume

 

 

 

 Possible loose internal connection. Please

 

 

 

contact Whynter for service

 

 

 

 

The air coming out of

 The filters are dirty or

 

 Clean the air filters

the unit is not very cold,

obstructed

 

 

or the airflow volume is

 The air intake or exhaust is

 

 Make sure there is at least 20" of clearance

weak

obstructed

 

from the air intake. Make the length of the

 

 The unit is set in DRY or

 

exhaust hose is as short as possible

 

 

 Set the unit to the cooling mode

 

FAN mode

 

 

 

 The unit is set to low fan

 

 Set the unit to a higher fan speed

 

speed

 

 

 

 

 

 

 

19 P a g e

 

Image 19
Contents Whynter ECO-FRIENDLY 8,000 BTU Portable AIR Conditioner Table of Contents Disposal Safety Precautions Operating Condition Room TemperatureImage Accessory Name Quantity Identification of AccessoriesRear Identification of PartsControl Panel Operating Your AIR ConditionerAir filter Installation Installation InstructionsCool or Auto Mode Dehumidify or Fan Mode Exhaust Hose InstallationWindow kit Installation Window kit Installation in a double-hung window Window kit Installation in a sliding door/ window Operation Instructions Sleep Mode Timer Delayed Switch on / OFF FunctionSetting Switch OFF Timer Setting Delayed Switch on TimerContinuous drainage Water DrainageManual drainage Remote Control END of Season Storage Care and MaintenanceCleaning the AIR Filters Cleaning the AIR ConditionerTechnical Data Problem Possible Causes Solutions TroubleshootingProblem Possible Causes Solutions ONE Year Limited Warranty Three Year Warranty on Compressor

ARC-08WB specifications

The Whynter ARC-08WB is an advanced portable air conditioner designed for those seeking powerful cooling capabilities combined with ease of use and mobility. Ideal for rooms up to 300 square feet, this unit effectively maintains a comfortable atmosphere during the hottest days of the year.

One of the main features of the ARC-08WB is its sleek and compact design, allowing it to fit seamlessly into any space. The unit is equipped with dual hose technology, enhancing its cooling efficiency. Unlike single-hose systems, the dual hose setup uses one hose to draw in air from the outside for cooling while the other expels warm air, resulting in faster and more effective temperature regulation.

The ARC-08WB also includes multiple operational modes, including cooling, dehumidifying, and fan-only settings. This versatility enables users to choose the most suitable option depending on their needs, making it an excellent choice for varied conditions. The dehumidifier function can remove up to 76 pints of moisture per day, helping to improve indoor air quality and comfort.

Operating the Whynter ARC-08WB is straightforward thanks to its user-friendly control panel and remote control functionality. The programmable timer allows for convenient scheduling of cooling sessions, ensuring that your space reaches the desired temperature at the right time. Additionally, the unit features an energy efficiency ratio (EER) of 12.0, which helps to keep energy consumption low while providing powerful cooling performance.

Another standout characteristic is the unit’s washable pre-filter and activated carbon filter, which work together to keep the air clean by trapping dust and allergens. This feature is especially beneficial for individuals with allergies or respiratory concerns.

Overall, the Whynter ARC-08WB combines efficiency, portability, and user-friendly features, making it a top choice for anyone looking to combat heat in a comfortable manner. Whether for a small apartment, office, or any space where a traditional air conditioning system isn't feasible, the ARC-08WB stands out as a reliable solution for maintaining comfort.