Part I- General, Part II- Product | Wayne-Dalton C24 instruction

Wayne-Dalton Corp. Upward Acting Sectional Doors

Models C24 & C20 Specifications

08360/WAY - BuyLine 0261

Note to specifiers: Words in parenthesis indicate options that need to be specified.

PART I- GENERAL

1.01Work Included

A)The sectional doors will be Wayne-Dalton Models (C24) or (C20) as manufactured by Wayne-Dalton Corp.

1.02 Related Work

A)Opening preparation, miscellaneous or structural metal work, access panels finish or field painting, field electrical wiring, wire, conduit, fuses, and disconnect switches are in the Scope of Work of other divisions or trades.

PART II- PRODUCT

2.01Door Sections

A)Will be roll-formed to a full 2" thickness from hot-dipped galvanized 24ga (Model C24) or 20ga (Model C20) steel. Horizontal meeting rails will be roll-formed with tongue-and-groove joint for weathertight fit; and section faces will be uniformly ribbed for added strength. End and intermediate stiles will be formed and fitted for continuous contact and bonded with elastomeric adhesive along edges of contact with interior of sections. Maximum stile spacing will be 48" on center. Bottom section will be furnished with retainer and bottom astragal. Exterior and interior of door sections will be prepainted with a two-coat, baked-on polyester primer and polyester top coat.

2.02Track

A)All track, vertical mounting angles and brackets will be commercial quality steel minimum 16 ga. thickness, hot-dipped galvanized. Track is (2") (3") standard or as specified. Vertical track to be graduated providing wedge type weathertight closing with (bracket mounting for wood jambs) (continuous angle mounting for wood jambs) (continuous reverse angle mounting for steel jambs), and are fully adjustable to seal door at jambs. Horizontal track will be reinforced with continuous angle of adequate length and gauge to help prevent deflection.

2.03Hardware

A)All hinges and brackets will be made from hot-dipped galvanized steel. Track rollers will be case hardened inner steel races with 10 ball (two inch) (three inch) rollers.

2.04Counterbalance

A)Springs will be torsion type, low-stress, helical wound, oil-tempered spring wire to provide minimum 10,000 cycles of use -- or meet specified cycles -- on continuous steel shaft; (solid CRS). Spring fittings and drums will be made of die cast, high-strength aluminum. Pre-formed galvanized steel aircraft cable shall provide a minimum of a 5:1 safety factor. (Long life springs of 25,000, 50,000 or 100,000 cycles may be specified and are recommended for high usage doors).

2.05Locks

A)Will engage right-hand vertical track and utilize an interior side lock. (Standard size rim cylinder short lock bar or 2" track only double lock bar that engages both vertical tracks are available.)

2.06Glazing

A)As specified (insulated doors having 24" x 6" lites with 1/2" SSB insulated or single pane 1/4" glass or acrylic or polycarbonate set in molded high-impact polymer frame). (Uninsulated doors will have

C24, C20 specifications

Wayne-Dalton is a trusted name in the garage door industry, known for its innovative designs and quality craftsmanship. Among its extensive product range, the Wayne-Dalton C24 and C20 models stand out for their durability, aesthetic appeal, and advanced technology. Ideal for both residential and commercial applications, these garage doors offer a blend of functionality and style that meets the needs of various users.

The Wayne-Dalton C24 model is recognized for its robust construction. This model features a high R-value, which indicates excellent insulation properties, making it energy-efficient and capable of maintaining temperature control in garages that are integrated into living spaces or utilized as workshops. The door is made from steel with a high-strength core, providing not only stability but also resistance against harsh weather conditions and potential impacts.

In contrast, the C20 model leans towards a more budget-friendly option without sacrificing quality. It also features a sturdy steel frame, ensuring that it can withstand daily use and challenges posed by external factors. While the C20 may have a slightly lower insulation rating compared to the C24, it still provides decent thermal performance, making it suitable for moderate climates.

Both models come equipped with Wayne-Dalton's proprietary technologies, such as the TorqueMaster® system. This unique lifting mechanism ensures smooth operation and enhances safety by eliminating exposed springs. The system is designed for reliability, reducing maintenance needs while delivering a consistent performance over time.

Aesthetically, the C24 and C20 models offer customizable options, allowing customers to select from various colors, designs, and finishes to match their home or business premises. This versatility makes them an attractive choice for those seeking to enhance curb appeal.

Additionally, both doors can be outfitted with optional features such as windows for natural light and viewing, decorative hardware for added charm, and advanced security features to ensure the safety of stored items.

In summary, the Wayne-Dalton C24 and C20 models are exemplary choices for those seeking quality garage doors with various features to suit different preferences and requirements. With their durable construction, energy efficiency, and customizable options, these garage doors are designed to enhance functionality and aesthetics in any setting.