Setting the Clock
Using the iBT20
1.Press and hold the Nap/Clock Set Button for 2 seconds until the clock display flashes and a beep sounds.
2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting).
Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the display.
3.To toggle the clock display between standard 12 hour time and 24 hour (“military”) time display, press the Alarm Button during time setting.
4.Press the Nap/Clock Set Button to confirm the time and exit clock setting mode. 2 beeps will confirm clock setting is complete.
FM Radio
1.Press and release the Mode Button as needed until the FM indicator icon and current FM radio station appear on the display.
2. Press the – or + Buttons to tune the radio to the desired station (hold to scan for the next clear station). Extend the FM antenna for best reception.
3.Press the or Buttons to adjust the volume on the unit. Note that the FM radio volume setting is stored separately from
4.When you are through listening, press the Button to turn the unit off.
5