Wayne-Dalton owner manual Mounting the KEP-IV, Entry

	Quick
Mounting the KEP-IV
		Start

CAUTION: MOUNT THE KEP-IV A MINIMUM OF 5 FEET FROM THE FLOOR TO KEEP IT OUT OF THE REACH OF SMALL CHILDREN.

With new installations, the KEP-IV should be programmed before mounting to wall.

1.Choose a convenient location that does not interfere with the normal opening and closing operation of the door, such as the door jamb, but is within sight of the door.

2.Two screws are included for proper mounting into wood or other similar material. A 5/64” X 3/4” pilot hole may need to be drilled for the mounting screws. If mounting to other materials consult a qualified building or hardware specialist for the proper hardware to insure secure mounting.

3.Insert Upper screw into upper pilot hole leaving head of screw 1/16” away from wall as shown in the illustration to the right.

4.Slide and lock back keyhole slot over exposed screw and position unit vertically.

5.Remove battery door to expose lower screw mounting hole.

6.Insert lower screw and tighten.

7.Replace battery door.

KEP-IV WIRELESS KEYLESS

ENTRY

LEAVE UPPER

SCREW HEAD

AWAY 1/16”

FROM WALL

1/16”

LOWER SCREW MOUNTING HOLE LOCATED BEHIND BATTERY COVER

Mounting

4