Viper FANG 18C user manual Storage, scrapping

Page 16
STORAGE

USER MANUAL

ENGLISH

STORAGE

WARNING!

If you are storing the machine in an area which can freeze, be sure both tanks and the solution plumbing are empty of all water and dry!

1.Always store the machine indoors.

2.Always store the machine in a dry area.

3.Always take off the pad driver / brush

4.Always store the machine with the squeegee assembly raised off the floor.

5.If storing in an area which may reach freezing temperatures, be sure to drain all fluids from the machine prior to storage. Any damage caused by freezing temperatures will not be covered by the warranty.

6.Drain the recovery tank and remove the clear on the top of the recovery tank so that it can “breathe” during storage.

7.Drain the solution tank of all fluid.

scrapping

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.

80188EU(1)2009-01

FANG 18C

15

Image 16
Contents SCRUBBER TABLE OF CONTENTS VACUUM MOTOR MAINTENANCEENGLISH 80188EU12009-01INTRODUCTION SAFETY UNPACKING/DELIVERY1.Machine 2.squeegee assembly 3.brush and pad driverGENERAL INSTRUCTIONS DANGERFANG 18C 80188EU12009-01The humidity must be between 30% and 95% MACHINE DESCRIPTION 1.Solution Tank9.Squeegee Assembly 10.Transport Wheels MACHINE STRUCTUREModel FANG 18CWIRING DIAGRAM FOR FANG 18C ENGLISHFANG 18C 80188EU12009-01Page 2.Lower squeegee assembly to the floor b DRAINING RECOVERY TANK DRAINING TANKS a DRAINING SOLUTION TANKFANG 18C MAINTENANCE 1.Drive the machine on a level floor SOLUTION CAUSESTORAGE scrapping