Replacing the Rechargable Ni-Cd battery pack
If after recharging, the battery power is still weak, replace the 4.8V 320mAH rechargeable battery pack.
1.) Turn the unit on its side and use a small screwdriver to remove the screws securing the battery compartment cover.
2.) Remove the compartment cover by sliding it in the direction of “arrow”.
3.) Unplug the rechargeable battery pack connector from the socket and lift the pack out of the compartment.
2
1
4
4.) Connect the new battery pack’s plug into the socket and place the battery pack into the compartment.
Note:
The replacement
Caution: The supplied battery pack plug has the red wire toward the EARPHONE jack when inserted correctly. To ensure proper polarity, only use the supplied or recommended replacement battery pack.
5.) Replace the compartment cover and secured with the two screws.
19
RP3228_030205.p65 | 19 |
2/3/2005, 10:33