Black Negative
Battery Lug
Battery (2) |
|
| Red Positive |
Battery Bracket (9) | Battery Lug |
4.Remove the Battery (2) and replace it with a new one of the same make and model (see Specifications on page 2).
5.Push the red wire connector onto the red positive (+) Battery lug.
6.Push the black wire connector onto the black negative
7.Slide the Battery (2) back into the battery compartment and replace the Battery Bracket (9) using four screws.
8.Close the Back Cover and latch the Security Lock.
9.Charge the new Battery (2) as described on page 4.
10.Recycle the old Battery. Do not throw in the trash.
Light Bulb Replacement
1.Press the Switch to the Off position and wait until the unit cools down fully.
2.Turn the Spotlight over so that it rests on the Lens rim. See photo below, left.
3.Using a spin hand wrench (not supplied), loosen and remove all the screws holding the Lens Reflector (5) cover on.
4.Carefully lift the Spotlight by the handle and set it on its side as shown below- right.
Spin Hand Wrench
Screws
Lens Rim
SKU 93175 | For technical questions, please call | Page 6 |