Before YOU Begin, What is included, AC Power

1.BEFORE YOU BEGIN

What is included

1 x LED-PAR200B

1 x Warranty Card

1 x Users Manual

Unpacking Instructions

Immediately upon receiving a product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.

AC Power

To determine the power requirements for a particular product, see the label affixed to the back plate of the product or refer to the product’s specifications chart. A product’s listed current rating is its average current draw under normal conditions. All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0% to 100% switch. Before applying power, check that the source voltage matches the product’s requirement. Check the product or device carefully to make sure that if a voltage selection switch exists that it is set to the correct line voltage you will use.

Warning! All fixtures must be connected to circuits with a suitable Earth Ground.

Safety Instructions

Please read these instructions carefully, which includes important

information about the installation, usage and maintenance.

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.

Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture.

This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to rain or moisture.

Make sure there are no flammable materials close to the unit while operating.

The unit must be installed in a location with adequate ventilation, at least 50 cm from adjacent surfaces. Be sure that no ventilation slots are blocked.

Secure fixture to fastening device using a safety chain.

Maximum ambient temperature is Ta: 40° C. Do not operate fixture at temperatures higher than this.

In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.

Don’t connect the device to a dimmer pack.

Make sure power cord is never crimped or damaged.

Never disconnect power cord by pulling or tugging on the cord.

Avoid direct eye exposure to lamp while it is on. Always disconnect from power source before servicing or replacing lamp or fuse and be sure to replace with same lamp source.

Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact CHAUVET®.

LED-PAR200B User Manual

2010-03-09/15:03

200B specifications

The Chauvet 200B is a professional-grade LED moving head fixture that stands out in the realm of stage lighting, known for its versatility and performance. This compact yet powerful light is designed to meet the demands of various events, including concerts, corporate functions, and theatrical productions. Its robust features, advanced technologies, and user-friendly interface make it a popular choice among lighting designers and technicians alike.

One of the key features of the Chauvet 200B is its bright output, which is facilitated by a high-quality LED source. This allows it to deliver impressive luminosity while consuming less power compared to traditional halogen lights. The fixture typically boasts a wide color spectrum, enabling users to create vibrant and dynamic lighting effects. With a color temperature adjustable feature, it can seamlessly transition from warm to cool tones, enhancing the visual atmosphere of any production.

The Chauvet 200B often incorporates a smooth pan and tilt movement, enabling precise positioning and sweeping motions. This is essential for creating dynamic light shows and for following performers on stage. Additionally, the fixture typically comes with built-in lighting effects, such as strobe functionality and various beam angles, which expand creative possibilities further.

In terms of technology, the Chauvet 200B is designed with user-friendly controls, often featuring DMX compatibility, allowing for seamless integration into existing lighting setups. Users can program intricate light shows, showcasing color changes, movement patterns, and effects with minimal effort. The fixture is typically designed for reliability, featuring a robust housing that can withstand the rigors of touring and venue installations.

Another noteworthy characteristic of the Chauvet 200B is its efficient cooling system, which helps to prolong the life of the LED components while ensuring optimal performance. The lightweight design allows for easy transport and installation, making it a favorite among event facilitators and production crews.

In conclusion, the Chauvet 200B is a highly capable moving head fixture that offers a blend of brightness, versatility, and technological sophistication. Its features cater to a wide range of lighting applications, making it an essential tool for professionals aiming to create stunning visual experiences on stage.