Operation
DMX Operation
This operating mode will allow for control with an external DMX controller. You must set the starting address for this mode.
If this is your first time using DMX, then it is recommended that you refer to the “DMX Primer” section in the “Appendix” of this manual.
Please see the instructions below for details on this mode.
1.Plug the fixture into power.
2.Plug a DMX controller into the fixture in a daisy chain configuration.
3.Press <MODE> until Addr appears on the LED screen.
4.Press <ENTER>.
5.Using <UP> & <DOWN>, select the DMX starting address.
6.Press <ENTER>.
DMX Channel Values
CHANNEL |
| VALUE |
| FUNCTION | |
|
|
|
| Pod 1 | |
| 000 ó 010 |
| Blackout | ||
| 011 ó 045 |
| Red | ||
1 | 046 ó 080 |
| Green | ||
081 ó 115 |
| Blue | |||
| 116 ó 150 |
| Yellow | ||
| 151 ó 185 |
| Magenta | ||
| 186 ó 220 |
| Cyan | ||
| 221 ó 255 |
| White | ||
|
|
|
| Pod 2 (run speed when CH.8 is between 011~239) |
|
|
| 000 ó 010 |
| Blackout |
|
|
| 011 ó 045 |
| Red |
|
2 |
| 046 ó 080 |
| Green |
|
| 081 ó 115 |
| Blue |
| |
|
| 116 ó 150 |
| Yellow |
|
|
| 151 ó 185 |
| Magenta |
|
|
| 186 ó 220 |
| Cyan |
|
|
| 221 ó 255 |
| White |
|
|
|
|
| Pod 3~6 | |
| 000 ó 010 |
| Blackout | ||
| 011 ó 045 |
| Red | ||
3~6 | 046 ó 080 |
| Green | ||
081 ó 115 |
| Blue | |||
| 116 ó 150 |
| Yellow | ||
| 151 ó 185 |
| Magenta | ||
| 186 ó 220 |
| Cyan | ||
| 221 ó 255 |
| White | ||
7 |
|
|
| Strobe | |
| 000 ó 009 |
| No function | ||
|
| 010 ó 255 |
| Strobe (slow~fast) | |
|
|
|
|
|
|
Mode
000 ó 010 Individual pod control with strobe (channels 1~7) 011 ó 047 Automatic 1
048 ó 095 Automatic 2
096 ó 119 Automatic 3
8120 ó 144 Automatic 4
145 ó 167 Automatic 5
168 ó 191 Automatic 6
192 ó 215 Automatic 7
216 ó 239 Automatic 8
240 ó 255
4. Operating Instructions | 9 | 1/12/2011 11:51 AM |