Elinca FX 400, FX 100 Cordless flash control, EL-Skyport Universal Set, Sychronisation socket

Page 11
Test and Ready

Cordless flash control

EL-Skyport triggers flashes without sync cords over a distance of approximately 100 m. Further detailed information please find under :

www.elinchrom.com / Products / RX Multi Remote

EL-Skyport Universal Set

(19360)

Universal receiver

Transmitter

Sychronisation socket

The standard socket 3.5 mm mini-jack (6).

N.B. Do not link ELINCHROM units by cable to other manufacturers sync outlets. ELINCHROM uses the low voltage (5V) for security reasons.

Open flash "Test"

Having pressed the touch pad to release a flash, the green «READY» light will appear again once the unit is recharged. If the green light does not appear the charge system could be defective.

5

Please contact and send to an authorized Elinchrom service.

Audible recharge signal

Beep

8

Select the function with the touch pad (8), the green indicator appears. Once recycled an acoustic signal indicates that the compact unit is ready.

10

Image 11
Contents Style FX 100/400 Table of contents FCC Class B Compliance Statement IntroductionStyle 100FX 400FX Notational Conventions Declaration of conformityDisposal and recycling CE markingTransport Safety noticePower cable Flash Tubes and Modelling lampsOperating instructions Before you startADF Control Panel Overview of controlsMains Fuse Mains SwitchTroubleshooting Mains Supply230V Modelling lamp options Modelling LightModelling lamps and fuse 230V Version Photocell Digital power displaySychronisation socket Audible recharge signalCordless flash control EL-Skyport Universal SetTraining with Elinchrom lighting Beginner’s Guide To Light Technical data FeaturesElinchrom Accessories Elinca sa Guarantee