Insignia IS-PA040719 Randomplay, Usinganti-Shockandskipfreeprotectionfeature, Search Function

RANDOMPLAY

Enables all of the tracks on a disc to be played in a random sequence.

1. Press the MODE/ST/MONO button until “RDM” text appears and flashes on the display while playing tracks on the disc.

2. The “RDM” text will stop flashing and the
random function will begin once the PLAY button
is pressed.
Press the MODE/ST/MONO button until RDM dis-
appears from the display.
SEARCH FUNCTION
Locating a Particular track
To go back to the beginning of the	Press the SKIP DOWN button
current or a previous track	lightly and repeatedly.
To go to beginning of any following	Press the SKIP UP button lightly
track	once for next track or repeated for
	desired track.
Locating a Particular Point in a track
To search backward at high speed	Press and hold the SKIP DOWN
	button
To search forward at high speed	Press and hold the SKIP UP button

Low level audio will still be heard during the search process to assist in locating the correct point in the track.

USINGANTI-SHOCKANDSKIPFREEPROTECTIONFEATURE

Note the “ ” indicator appears on display as being empty when the player is first activated. it immediately begins to store sound data in memory

bank, The indicator appears to be “ ” when the data buffer is full.

When the laser loses tracking due to mechanical shock, the data stream into the memory is interrupted but the data output from the memory buffer continues. The sound is not interrupted. As the data is read from the memory,

the indicator changes from “ ” to “ ” .

Once the laser locks again on the CD track, the data stream is fed to the memory and joined to the previous data (see indicator changes) at higher speed.

CAUTION

If the unit is subject to excessive and continuous repeated shocks, it will cause the sound to skip. Also note the “ ” indicator will appear empty.

NOTES

"When the “ANTI-SHOCK” is operating, the battery consumption is higher because the disc rotates faster than normal and also the memory circuitry is activated.

"When the digital anti-shock function is switched “ON” or “OFF”, the sound will be interrupted. This is normal.

"Remember that conditions such as dirty, scratched or warped discs may cause skipping or noise thereby affecting performance of the “ANTI- SHOCK” system.

"Skip Free Anti-Shock protection greatly reduces or eliminates skipping during many active uses.

10 11