WAY Protection, IR Remote Silence | First Alert GCO1B instruction

CO&EXPLOSIVE GAS COMBO ALARM

CAT.GCO1B

3-WAY PROTECTION

Three sensors in one alarm: carbon monoxide, propane gas and natural/methane gas.

ELECTROCHEMICAL CO SENSOR

Most accurate technology available for detecting carbon monoxide as compared to other sensing technologies.

IR REMOTE SILENCE

Point and click any remote control to silence unwanted alarms.

EZ VIEW BACKLIT DIGITAL DISPLAY

TWO SILENCE FEATURES

Silences low battery chirp for up to eight hours or silence nuisance alarm for several minutes.

END OF LIFE TIMER

120V AC Plug-in with 9V Battery Backup

First Alert Model GCO1 is a 120V AC plug-in with battery back-up single station carbon monoxide and explosive gas (propane and natural/methane) combination alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories, and other multifamily dwellings as defined in standard NFPA 101. Model GCO1 has been fully tested and complies with, UL1484, UL2034 and other agencies that model their codes after the above agencies. It meets building codes where 120V AC plug-in digital display with battery back-up carbon monoxide and explosive gas combination alarms are required.

First Alert Model GCO1 is a state of the art carbon monoxide and explosive gas combination alarm designed to provide early warning of a carbon monoxide, propane or methane gas danger. It features an advanced electrochemical CO sensor and a metal oxide explosive gas sensor with an EZ view backlit digital display. It plugs in easily into any standard 120V AC outlet. The line cord allows for convenient mounting options where methane requires unit to be mounted up high and propane should be mounted low. Carbon monoxide mounting location is not height sensitive as CO disperses evenly throughout the house. The peak level function allows for easy viewing of highest gas levels detected. It has a 9V alkaline battery backup and a single button test/silence button. This alarm has two silence features. Low Battery Silence: Temporarily silence the low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several minutes. The alarm can also be silenced by using most Infrared (IR) remote controls. The End of Life timer provides audible and visual notice when alarm needs to be replaced. Battery installation and removal can occur while the unit is mounted to the wall or plugged into the electrical outlet via the swing up battery cover. Includes mounting anchors and screws.

Provides audible and visual notice when alarm needs to be replaced.