First Alert MODEL FCD3N user manual For Tabletop Use, To Mount On The Wall

Page 10

For Tabletop Use

1. Close the battery compartment by sliding the mounting bracket/battery door back onto the back of the CO Alarm.

2.Test the CO Alarm as described below.

3.Set the CO Alarm in plain view on a table where it will not be blocked by any obstructions.Table height should not exceed 36” (92 cm).

IMPORTANT!

Put the CO Alarm where children and pets cannot reach it.

To Test this CO Alarm:

Push and hold the Test/Silence button on the cover until you hear a “chirp.” The “chirp” marks the start of the self-test sequence.

•First, the yellow and green lights will flash briefly—this is normal.

•Next, the alarm horn will sound: 4 beeps, a pause, then 4 beeps. The red light will flash quickly.

The alarm sequence should last 5-6 seconds. If it does not alarm, make sure the battery is correctly installed, and test it again. If the unit still does not alarm, replace it immediately.

To Mount On The Wall

Tools you will need: pencil, drill with 3/16” or 5mm drill bit, flathead screwdriver, hammer.

1.Choose a location on the wall. Do not install the alarm closer than 4” from where the wall meets the ceiling.

2.Hold the mounting bracket

against the wall, and make a mark inside each keyhole where you will drill your mounting hole.

3.Use a 3/16” drill bit to drill

through the marks you made for the mounting holes.

4.Insert the plastic screw anchors into the mounting holes until they are flush with the wall. If necessary, tap them gently with a hammer.

5.Line up the mounting bracket up with the

screw anchors, and screw the bracket onto

the wall.

6. Slide the CO Alarm

onto the mounting bracket until you feel it click into place.

7.Test the CO Alarm as described in “To Test this CO Alarm.”

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model FCD3N-User’s Manual Table of Contents Basic Safety Information IntroductionCover of Your CO Alarm HOW Your CO Alarm WorksGeneral Information What the Lights and Alarm Tones Mean Welcome ChirpCO Alarm Specifications A Single-level Home InstallationWhere to Install CO Alarms A Multi-level HomeWhere not to Install Your CO Alarm Do not locate this CO AlarmHOW to Install Your CO Alarm Installing the 9V BatteryFor Tabletop Use To Mount On The WallIf the Alarm Sounds If Your CO Alarm SoundsFinding the Source of CO After an Alarm While the alarm is silenced If the CO Alarm Using the Silence FeatureThis means Testing and Maintenance Weekly TestingTo keep the CO Alarm in good working order Regular MaintenanceChoosing a replacement battery Symptoms of CO Poisoning What is CO?What You Need To Know About CO Potential Sources Of CO In The Home How Can I Protect My Family? UL2034 Required Alarm Points What Levels of CO Cause an Alarm?Underwriters Laboratories Inc. UL2034 Troubleshooting Guide Problem This means You shouldGeneral Limitations Of CO Alarms Limited Warranty Enterprise Court, Aurora, IL

MODEL FCD3N specifications

First Alert MODEL FCD3N is a versatile and highly effective fire extinguisher that has garnered attention for its innovative features and reliable performance. It is specifically designed for home use, making it an essential tool for fire safety.

One of the standout features of the FCD3N is its multi-purpose capability. This extinguisher is rated as a Class B and C type, which means it can effectively combat flammable liquids and electrical fires. This versatility ensures that homeowners are prepared to deal with a wide range of potential fire hazards, from kitchen grease fires to electrical equipment malfunctions.

The FCD3N incorporates an easy-to-use design, featuring a simple pull-pin mechanism that ensures users can quickly access the extinguisher in an emergency. The lightweight construction allows for effortless handling, making it suitable for individuals of all ages. Additionally, the bright red color of the extinguisher makes it easily identifiable in case of an emergency.

One of the key technologies utilized in the FCD3N is its durable plastic cylinder, which is rust and impact-resistant. This construction allows the extinguisher to be placed in various environments without the risk of corroding or degrading over time. The FCD3N also features a pressure gauge, allowing users to easily monitor its readiness for use. This is a crucial feature, as it ensures the extinguisher is in optimal condition when it is needed most.

The FCD3N is designed with user-friendly instructions printed directly on the unit, ensuring that even those who may not be familiar with extinguisher usage can understand how to operate it effectively under stress. The quick-reference labeling helps users recall the steps necessary to operate the extinguisher, maximizing its effectiveness in a crisis.

Another notable characteristic of the First Alert MODEL FCD3N is its compact size, which makes it convenient for storage in various locations around the home, including kitchens, garages, and near electrical appliances. This ease of access significantly increases the likelihood of timely use when facing a fire emergency.

In summary, the First Alert MODEL FCD3N is a robust and user-friendly fire extinction solution suitable for any home. With its multi-purpose rating, durable construction, easy operation, and clear instructions, this fire extinguisher is an essential safety device that offers peace of mind to homeowners. Investing in the FCD3N ensures that families are prepared to act swiftly in the event of a fire, safeguarding lives and property alike.
Top Page Image Contents