Honeywell RFR200 warranty Service life and warranty period, Product profile, Part description

Page 1

Residential Flammable Gas Leakage

Detector (RFR200)

Operation Instructions

Thank you for choosing Honeywell gas leakage alarm system. Please carefully read through the instructions before using this product, and perform according to the relevant procedures as provided herein to avoid any damage to this machine or any other incidents incurred by your inappropriate operation.

The user shall assume any liability arising from or in connection with his or her failure to comply with the instructions in this manual and part installation, repair or replacement by unauthorized person.

• Service life and warranty period

1.The optimal service life is five years (since the purchase, please keep your invoice).

2.The warranty period for free is one year (since the purchase).

3.User must read through this instruction manual carefully and operate correctly, and Honeywell will repair or replace for free in case the machine does not work due to any quality issue at the manufacturer’s side.

•Operation Standard: GB15322.2-2003

•Detection Gas :LNG

•Installation instruction

The detector should be installed in the room with gas consumed equipment, and the alarm shall have a horizontal distance of 3m or less from the gas consumed equipment. In case natural gas is used, the detector may

Fixing the adapter by screw which is offered.

To remove the panel, push inward the locking tab and then pull out the

(Must use the machine screw to the outlet box.)

panel towards the opposite side.

(Must use the tapping screw to the wood wall.)

 

While installation, ensure the wire is routed out through the reserved hole

 

before installation. AC wire have to go through the adapter hole. Please

 

check the direction of adapter and check the arrow and “UP” mark.

 

Fix the host onto the adapter for mounting with screws.

 

For the product, its color and style, please refer to the actual product as standard.

Please keep this manual in a safe place for future reference. If you should have any doubt or dissatisfaction with our product or service, including product technology, quality, installation and maintenance, please contact us immediately so that we can deal with your suggestions in a proper way.

• Product profile

As the gas detection expert, Honeywell Analytics brings together nearly

200 collective years of expertise in design, manufacture and technology. As the leader in gas detection and alarm equipment industry in the world, we apply high-precision detection standards to domestic gas leakage alarm systems. By integration of powerful catalytic flammable sensing technology and advanced electronic technology, Honeywell is dedicated to providing multiple protections for both our customers and their properties.

• Function and indication chart

 

Operation

 

LED

Relay

 

B

 

 

 

 

Description

 

u

Timing/Interval

 

 

 

 

 

 

 

 

 

 

 

 

G

R

Y

Al

Ft

 

z

 

 

 

 

 

 

 

z

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Normal

When no gas is present, the green

Y

N

N

De

En

 

N

Always G LED on if

 

 

Operation

LED

 

power is normal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Successful

On demand test result by press the

 

 

 

 

 

 

 

8 times beep with red

 

 

button. Red LED and Yellow LED will

Y

Y

Y

En

En

 

Y

LED flash 4 times and

 

 

Test*

be blink in order. After then return to

 

 

 

 

 

 

 

then yellow LED flash

 

 

 

normal mode

 

 

 

 

 

 

 

4 times

 

 

Unsuc-

On demand test result by press the

Y

N

Y

De

De

 

N

Same as default condition

 

cessful Test

button. After then return to normal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mode

 

 

 

 

 

 

 

 

 

 

 

 

When detects gas, it will give the

 

 

 

 

 

 

 

 

 

 

 

Alarm

alarm signal continuously. The red

Y

Y

N

En

En

 

Y

8 times beep with red

 

 

LED and sounder will annunciate

 

 

 

 

 

LED flash 8 times

 

 

 

When gas level is less then alarm

 

 

 

 

 

 

 

 

 

 

 

 

point, return to normal operation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hush

If required, the audible alarm can be

 

 

 

 

 

 

 

 

 

 

 

silenced for 5 minutes by pushing

Y

Y

N

En

En

 

N

Red LED flash 4 times

 

Function

the button marked “Test”. The red

 

each time

 

 

 

alarm will continue to flash for 5

 

 

 

 

 

 

 

 

 

 

 

 

minutes

 

 

 

 

 

 

 

 

 

 

 

 

If gas is still present after 5 minutes

 

 

 

 

 

 

 

 

 

 

 

 

hush period, the audible alarm will

Y

Y

N

En

En

 

Y

Same as alarm condition

 

 

 

sound

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

End of life time(5 years)

Y

N

Y

De

De

 

Y

3 long chirps/min

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Trouble

Cell health trouble/No cell

Y

N

Y

De

De

 

Y

1 long chirps/min

 

Condition

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power trouble

N

N

Y

De

De

 

Y

2 long chirps/min

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EEPROM CRC fail/ Program

N

N

Y

De

De

 

Y

Continues beep

 

 

 

code fail

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* Alarm relay shall be teseted often 5 seconds of button when normal conduction.

Power LED (green)

Alarm LES (red)

Fault (yellow)

1.Power LED (green): indicates the power system is in normal operation

2.Alarm LED (red): indicates the concentration of combustible gas leakage reaches the set value

3.Fault LED (yellow): indicates the alarm is in fault condition

be installed at the height with a 30m distance or less from the ceiling.

30cm or less

3m or less

1.2m-1.6m

Detecting natural gas

Check that each part or component is in good condition before

installation, and get prepared the screws and other attachments we’ve provided in the toolkit.

• Part description

Control panel

Front cover assy

Strain relief

Main assy

Adapter

Remote sensor

Screw

Remote sensor

• Procedures for control panel installation

Find an appropriate installation point on the wall.

Flush mounting — in case flush mounting is selected, the adapter for mounting is not necessarily used. You need to dis-connect the AC power wire and remote sensor wire from main Assy and take off the adapter first.

Remote sensor connector

Remote sensor cable

Cut off the strip on the left edge of the host with a knife, and fixed the machine body into the groove previously excavated on the wall with screws (detailed dimensions of the groove: width 134mm~136mm, height 92mm~ 93mm).

Cut off

If relay is used for signal output, then remove the wire trunking and fix it with screws again after connecting the signal line to the corresponding connecting terminal.

Fault

NC

NC:Normal close

COM

COM Alarm

 

 

 

NO:Normal open

Press down the panel onto the host to complete the installation.

• Procedures for remote sensor installation

Fix the sensor onto the ceiling with screws.

•Incorrect mounting position

1.Places where exhaust, steam and oil smoke from gas appliances may directly influence

2.Places near to the air inlet, exhaust fan, door and window where favorable ventilation is ensured

3.Places which are fenced off by the window curtain, vertical curtain, cabinet door, ceiling and cross beam, etc.

4.Places with high temperature and moisture like cooking room and boiler room, etc.

5.Places where power supply of the alarm may possibly be switched off

6.Places outdoor or where the temperature is lower than -10 °C or higher than +55 °C

•Precautions on using

1.Do not switch off the power supply of the alarm, otherwise the alarm may not work when gas leakage occurs.

2.Do not touch any part of the power supply with wet hand(s) as this could cause risk of electric shock.

3.Do not remove or retrofit the alarm.

4.Do not use volatile matters in the vicinity of the alarm, like hair spray, pesticide, paint, adhesive agent and alcohol, so as to avoid false alarm an eliminate any influence on the service life of the sensitive elements.

5.Do not eject high-concentration gas into the access opening to avoid performance of the sensor.

6.Frequently check the power LED (green) is always on.

7.Press down the self-test button of the detector once every 6 months to check it is in normal standby state.

8.In case a fault happens in the alarm, please contact our company or the local representative office immediately.

9Never connect the power supply to any signal output terminal.

10.Prevent the product from falling down from a high level during installation and operation, otherwise the performance of the product may be impaired.

11.Never attempt to replace the remote probe or change the length of its wire by any unauthorized person.

12.Never clean the alarm with a cleaning agent.

13.Please keep the alarm away from silicon-contained material.

•Our company will not assume any responsibility for product damage or loss of function caused by the following reasons:

1.Consumer’s disassembly or intentional damage

2.Force majored like fire, earthquake, lightening, abnormal voltage, etc.

3.Wrong installation position or failure to switch on power supply of the detector

4.Expiration of the lifetime

5.Falling down, impact and other faults and damages incurred by the consumer

6.Other contamination, damages, faults or damages not caused by the manufacturer

Honeywell Trading (Shanghai) Ltd

 

430 Li Bing Road

 

Zhangjiang Hi-Tech Park

 

Shanghai, China

H_RFI Manual_09_V1_AP

 

Page 1 Page 1
Image 1
Page 1 Page 1
Contents Function and indication chart Service life and warranty periodProcedures for control panel installation Procedures for remote sensor installation

RFR200 specifications

The Honeywell RFR200 is a sophisticated wireless thermostat designed for residential and commercial HVAC systems. Known for its reliability and user-friendly features, the RFR200 enhances energy efficiency and provides maximum comfort for various environments.

One of the standout features of the RFR200 is its wireless communication capability, which allows it to connect seamlessly with compatible Honeywell heating and cooling systems. This wireless connectivity eliminates the need for cumbersome wiring, making installation quick and straightforward. It employs secure radio frequency technology to ensure stable and interference-free communication, assisting in accurate temperature control.

The RFR200 boasts a sleek digital display that provides real-time temperature readings and system status indicators. The interface is intuitive, featuring easy-to-read icons and prompts that simplify navigation through settings. Users can easily program heating and cooling schedules, adjust temperature settings, and switch between different modes, including auto, heat, and cool.

Energy efficiency is at the forefront of the RFR200’s design. The unit incorporates advanced algorithms to optimize energy usage, ensuring that HVAC systems run efficiently without compromising comfort. By allowing users to set specific temperature schedules, the RFR200 significantly reduces energy consumption during off-peak hours.

Another key characteristic of the RFR200 is its compatibility with Honeywell’s Total Connect Comfort app. Through this app, users can control their thermostat remotely using their smartphones or tablets, granting the ability to adjust settings from anywhere. The remote access feature empowers homeowners to ensure their comfort and energy savings even when they are away from home.

The RFR200 also includes robust safety and diagnostic features. With built-in alerts that notify users of filter changes and system malfunctions, it helps maintain optimal HVAC performance and longevity. Furthermore, its dual-power capability allows it to operate using batteries or through an external power source, adding flexibility for different installation setups.

In summary, the Honeywell RFR200 is a versatile and cutting-edge wireless thermostat that meets the demands of modern heating and cooling solutions. Its user-friendly design, advanced programming capabilities, energy-saving features, and remote control functionality make it an ideal choice for homeowners and businesses looking to optimize their environment.
Top Page Image Contents