Installation instructions

1.Turn gas grill burner control knob OFF, turn propane supply OFF at cylinder.

2.Move gas grill to an open, well-ventilated outdoor area prior to disconnecting/connecting to outlet of propane cylinder service valve.

3.Make sure all connections are clean. Adjust gauge to desired position. Hand tighten the plastic coupling nut clockwise to the large outside threads on the propane cylinder service valve until the connection seals properly. (see Figure 2)

4.With gauge in desired position for easy reading, attach the regulator to the Grill Gauge by hand tightening the regulator plastic coupling nut clockwise to the large outside threads on the Grill Gauge.

5.To disconnect Grill Gauge from cylinder service valve outlet, turn OFF appliance(s) burner control knob(s); turn OFF propane supply at cylinder. Turn plastic coupling nut counter clockwise until it disengages from large outside threads on cylinder service valve outlet.