Maintenance, Battery Installation

5.Allow span gas to flow until the displayed reading stabilizes – approx. 3 minutes. Then, using Calibra- tion Tool 06-9453 (supplied in Calibration Tool / Cup Kit 19-3242), turn the Span Adjust potentiom- eter until the displayed reading matches the concentration stamped on the Span Gas Cylinder.

6.Calibration is now complete. Turn off the Regulator and remove the calibration equipment.

Maintenance

Battery Installation

Remove the slotted screw from the rear of instrument; then lift off the front case.

Install a 9V Alkaline battery (Duracell MN1604 or equiv.) in the location shown in Figure 3; then reinstall the front case.

Sensor Replacement

Figure 3. Battery

Location

The sensor needs replaced when it can no longer be calibrated to the Span Gas Cylinder value using the Span Adjust potentiometer.

1.See Figure 4. Remove the screw from the rear of the instrument; then lift off the front case and remove the printed circuit board assembly.

2.Unplug the old sensor and dispose of it properly.

3.Inspect the sensor gasket and filter. Replace an item if is torn, deformed, or contaminated with dirt.

4.Remove the wire-jumper from the pins of the new sensor; plug in the sensor; then reassemble the instrument.

5.Calibrate the new sensor.

- 5 -

50 specifications

The Bacharach 50 is a state-of-the-art portable emissions analyzer designed to ensure compliance and help improve efficiency in various industrial applications. This advanced device is particularly targeted towards professionals working in HVAC/R, industrial maintenance, and environmental monitoring. Its robust features make it an essential tool for anyone needing to measure and analyze combustion gases, ensuring that systems are operating efficiently and safely.

One of the primary features of the Bacharach 50 is its multifunctionality. It can accurately measure a wide range of gases, including carbon monoxide (CO), carbon dioxide (CO2), oxygen (O2), and nitric oxide (NO). This enables technicians to conduct thorough emissions testing and combustion efficiency analysis. Additionally, the analyzer supports multiple measurement modes, allowing for both real-time monitoring and detailed diagnostics.

The device is equipped with advanced sensor technology, which contributes to its reliability and accuracy. The sensors are designed for long-term performance, with a quick response time to ensure that users get timely results. Calibration is straightforward, and the analyzer allows for easy replacement of sensors, minimizing downtime and maintenance costs.

A key characteristic of the Bacharach 50 is its user-friendly interface. The device features a large, backlit display that provides clear readings, enabling users to interpret results at a glance. The intuitive navigation ensures easy access to all functions, making it suitable for both experienced professionals and those new to emissions testing.

Portability is another essential feature of the Bacharach 50. Weighing just a few pounds, the device is easy to transport from one job site to another. Its battery-operated function allows for up to eight hours of continuous use, enhancing its practicality in the field.

Connectivity options add to the versatility of the Bacharach 50. The device can easily interface with computers and mobile devices for data logging and analysis. This connectivity allows users to generate reports and share results with clients swiftly, streamlining workflow and improving communication.

In summary, the Bacharach 50 is an innovative portable emissions analyzer that combines advanced technology with user-friendly features. Its accurate gas measurements, reliable sensor technology, ease of use, and portability make it an indispensable tool for professionals in the industrial sector. With this device, users can ensure compliance with regulations while enhancing the efficiency and safety of their operations.