Emerson 210-2000 manual Overview, Mounting

Page 1

Carbon Dioxide Sensor

Product Information Sheet

210-2000

Overview

CPC’s CO2 sensor (P/N 210-2000) is a non-dispersive infrared analyzer designed for measuring environmental CO2 concentration in ventilation systems and indoor spaces. Its measurement range of 0-2000 or 0-5000 ppm covers the range required to monitor compliance with ASHRAE and other ventilation efficiency standards.

An LCD display is available to provide local indication of CO2 concentration and facilitate the setup and calibration process. An adjustable setpoint relay is available for direct control and alarm applications. Microprocessor-based digital electronics and a unique self-calibration algorithm improves long-term stability and accuracy

Mounting

Before mounting, remove the door from the circuit board by pressing a screwdriver against the locking tab on the top of the enclosure. Pry the circuit board

away from the mounting plate using a screwdriver inserted into the two tab slots on the top of the enclosure.

Choose a location for the sensor with good air circulation, away from ventilation inlets, doors, windows, or other points where fresh air enters the room. The sensor should be mounted at least 4-1/2 feet above the floor. The environment temperature must be within 32°–112°F (0°–50°C).

If wiring will be coming in through the mounting plate from the back, punch out openings in the mounting plate and use the plate as a template for locating holes. Mount the mounting plate against a wall or other flat surface by using the two mounting holes and the screws provided (use wall anchors for drywall installations).

NOTE: Sensors must be mounted vertically (straight up and down) to ensure proper readings.

Figure 1 - CO2 Sensor (exploded view)

40

Image 1
Contents Mounting OverviewPower Wiring WiringAnalog Output Wiring Relay WiringSetting Up the CO2 Sensor Software Setting the Volts/Amps SwitchSetpoint AltitudeReplacing the Door Setting Up The Sensor Type in Einstein Reflecs ControllersSpan Output

210-2000 specifications

The Emerson 210-2000 is a pioneering device in the realm of modern industrial automation. Designed specifically for process automation, this controller brings a wealth of features and advanced technologies that help streamline operations and enhance productivity across various sectors.

At the core of the 210-2000 is its powerful processing unit, which allows for rapid data handling and execution of control algorithms. This ensures quick responses to process changes, thereby maintaining optimal operations. The controller is based on a robust platform that supports extensive scalability, meaning it can be easily integrated into both small and large systems, adapting to the unique needs of any facility.

One of the standout features of the Emerson 210-2000 is its exceptional connectivity options. It supports multiple communication protocols, including Ethernet/IP, Modbus, and Profibus, allowing seamless integration with existing networks and third-party devices. This versatility ensures that users can leverage their current infrastructure while future-proofing their systems against evolving technological demands.

The 210-2000 is also equipped with advanced diagnostic capabilities, which facilitate predictive maintenance and reduce downtime. Through its built-in monitoring tools, operators can access real-time data on system performance, quickly identifying potential issues before they escalate. This proactive approach not only enhances reliability but also contributes to significant cost savings over time.

In terms of user interaction, the Emerson 210-2000 features a user-friendly interface that simplifies configuration and monitoring. The intuitive design allows operators to easily navigate through settings and access critical information without extensive training. Coupled with extensive support documentation and online resources, the transition to using this controller is smooth for both new and seasoned users.

Security is another critical aspect of the Emerson 210-2000. As cyber threats grow in prevalence, the controller comes equipped with robust security measures that protect sensitive data and ensure compliance with industry standards. Features such as secure access controls and encrypted communication help safeguard against unauthorized access, making it a reliable choice for various applications.

In summary, the Emerson 210-2000 stands out in the field of industrial automation for its powerful performance, versatile connectivity, and user-focused design. Its advanced diagnostic capabilities and security features make it a reliable choice for industries seeking to optimize their processes while maintaining high standards of safety and efficiency.