Honeywell V5100NS manual Using Your Ultrasonic Humidifier, Operating Instructions, First Time Use

Page 4
Turn the Power Knob to the On position and then set mist intensity.
Do not operate the humidifier without water in the Water Tank.

Using Your Ultrasonic Humidifier

First Time Use

Read all instructions before using this appliance.

Unpack and remove all packing material from the Water Tank, Mist Nozzle and Base. Completely unravel power cord and place unit on a flat, stable surface. Remove the protective wrapper from the Demineralization Cartridge and place into the unit as shown. Follow the directions below to fill and operate the humidifier.

Filling the Water Tank

Always UNPLUG the humidifier before filling.

1. Remove the Water Tank from the Base and turn it upside down. Turn the Tank Cap counterclockwise to open. Rinse and wipe clean.

2. Fill the Water Tank with clean, cool, tap water and replace the Tank Cap by firmly turning clockwise. Turn the Tank upright and check Tank Cap for leaks. If any water drips from Tank Cap, remove it and re-tighten. Use of very cold water may temporarily reduce the mist output. Never fill the humidifier with hot or warm water as this could cause damage and void your warranty.

3.

4.

To avoid white dust we recommend using a Kaz Demineralization Cartridge (Model DC-

51)and replacing it after 30-40 fillings. If you live in an extremely hard water area you may also wish to use distilled water to further reduce white dust. Refer to About White Dust section.

Inspect the Base and Nebulizer for cleanliness. Refer to Care and Cleaning section. Replace the Water Tank on the Base.

Operating Instructions

1.

2. After filling the humidifier, be sure the Power Knob is in the OFF position, then plug the power cord into a 120 volt AC wall outlet.

3.

4. Mist will not appear immediately; allow a few minutes for the water to fill the Reservoir. If you are using a new Demineralization Cartridge, it may take up to fifteen minutes for the filtering material to become saturated and for mist to appear.

5. Direct Mist Nozzle away from walls and furniture. If condensation forms on walls or windows, or if indoor relative humidity exceeds 50%, reduce mist intensity setting, open door to room where humidifier is operating, or turn unit off.

6. If mist is not produced, unplug cord and check the Water Sensor in the Reservoir to ensure it is in contact with the water. The water level in the Base must be high enough to partially immerse the Water Sensor in order for the humidifier to work.

7. Turn the humidifier off before removing and refilling the Water Tank. When the tank is empty the mist will stop although the fan will continue to operate.



Page 3 Page 5
Image 4
Page 3 Page 5
Contents  Cool Mist for Relief of Cold and Flu Symptoms Use and Care ManualImportant Safety Instructions Do not touch skin with exposed Vicks VapoPadVicks Ultrasonic Humidifier Carrying Handle Water Tank Tank CapUsing Your Ultrasonic Humidifier Operating InstructionsFirst Time Use Filling the Water TankDaily Maintenance Kaz Demineralization Cartridge Model DC-51Scent Pad Heater Directions for Use About White DustCare and Cleaning Weekly MaintenanceEnd of Season Maintenance Clean the Water Tank and Base after long periods of storageTroubleshooting Guide Warranty Kaz, Incorporated One Vapor Trail Hudson, NY USA

V5100NS specifications

The Honeywell V5100NS is a sophisticated, state-of-the-art control panel designed to enhance the performance and efficiency of heating, ventilation, and air conditioning (HVAC) systems. This product reflects Honeywell’s commitment to providing advanced solutions that cater to the demands of modern buildings, be they residential or commercial.

One of the standout features of the V5100NS is its user-friendly interface, which allows users to easily navigate through various settings and options. It includes a robust display that provides real-time information about system performance and alerts, ensuring that users can quickly assess and respond to any issues that may arise. The panel is designed to be intuitive, minimizing the learning curve for new users and technicians alike.

In terms of technology, the V5100NS employs advanced algorithms that optimize HVAC operations, leading to increased energy efficiency and reduced operating costs. Its ability to integrate with multiple sensors and actuators allows for precise control over temperature, humidity, and air quality. This feature not only enhances comfort but also promotes sustainability by minimizing energy waste.

Another significant characteristic of the Honeywell V5100NS is its compatibility with a wide range of HVAC systems. Whether dealing with residential furnaces, commercial rooftop units, or complex district heating systems, this control panel is engineered to accommodate various configurations, ensuring versatility in application.

The V5100NS also supports connectivity options, enabling it to be part of a broader smart building ecosystem. By linking the control panel to building management systems (BMS), users can gain insights into their energy consumption trends and make informed decisions about system operations and maintenance schedules.

Additionally, Honeywell has incorporated enhanced security features into the V5100NS, safeguarding critical data from unauthorized access. This priority on security ensures that users can operate their systems with confidence, knowing that their information is protected.

Overall, the Honeywell V5100NS stands out in the market for its combination of intuitive design, advanced technology, and adaptability to various HVAC systems. As building management moves toward more interconnected and intelligent solutions, the V5100NS presents itself as a forward-thinking choice that delivers efficiency, flexibility, and reliability in controlling HVAC operations. With Honeywell's reputation for quality and innovation, the V5100NS is an ideal option for both established systems and new installations.
Top Page Image Contents