EFJohnson VR-CM50 manual PIE Support Rail Mounting, CRT Monitor Shelf FXM-192 OP- Tion

Page 35

CABINETRY ASSEMBLY FOR CRT CONSOLE SYSTEMS

2. Mount the CRT Monitor Shelf

The monitor shelf is mounted in the base section of the FC192 cabinet. Refer to Figure 3-18.

a. Snap Tinnerman clips to the 6th hole counting down from the top of the lower frame side on both the front left and right sides of the cabinet.

b. Snap Tinnerman clips to the 8th hole counting down from the top of the lower frame side on both the rear left and right sides of the cabinet.

c. Install the monitor shelf with the four (4) 12-24x pan head Phillips screws provided. The monitor shelf mounts with the 2.5" hole to the rear.

Figure 3-16 PIE SUPPORT RAIL MOUNTING

d. Remount the distribution rail to holes 31 and 33 (counting up from the console bottom) using the

(4) -20x3/4 hex bolts previously removed.

3.10.7CRT MONITOR SHELF - FXM-192 (OP- TION 7)

The hardware in Table 3-1is included with the

Monitor Shelf assembly (FXM-192):

1.Mount the Tinnerman Clips

a. Snap the Tinnerman clips onto the left and right

sides of the console frame at the second, third and seventh hole, counting up from the bottom cowl. Repeat the same, counting down from the top cowl.

b. Attach the EIA Shims - Attach the EIA shims using

two (2) 12-24x pan head Phillips screws per shim to the Tinnerman clips at holes 3 and 7, 12 and 16, counting down from the top cowl.

c.Remove the Distribution Rail - Remove the distribution rail at the rear of the cabinet by removing the four (4) 1/4-20x3/4 hex bolts. Put them aside to use for reassembly.

d.Install the Right and Left Inner Closures - Install the right-side inner closure by sliding it in from the front of the console and placing its shim between the already installed "EIA" shims" and "inner closure" itself. (All holes line up when seated properly). Screw in the right-side closure with the four (4) 12-24x1" black truss head Phillips screws and #12 black nylon washers. Repeat this procedure for the left side.

Figure 3-17 INSTALLING TINNERMAN CLIPS

 

February 1996

3-9

Part No. 004-3039-274

Page 34 Page 36
Image 35
Page 34 Page 36
Contents VR-CM50 Console System Installation Guide Page VR-CM50 Console System Installation Guide Page Table of Contents List of Figures List of Tables Page Sample Packing List Receiving InformationTools Required Hardware Included for Installation and AssemblyCPU Cabinet Hardware Location of the Central PROCES- SOR Package CPPRear View Joining TWO CPU Cabinets Cable Routing Connection of the Central PRO- Cessor Package CablesMounting of Surge Arrestor BOX- ES and Ground Bracket Placement of Surge Arrestor BoxesWall or Panel Board Installation Grounding the System Star Grounding ConfigurationGrounding Installation Common Ground Bracket AssemblyCPP I/O Panels CPP I/O PanelsI/O Panel Report Sample Customer Data SheetsRTL I/O Panel Assignments 10 Logging Recorder 12 Surge Arrestor BOX Wiring Wiring of Surge Arrestor BoxesVoter System Connections Standard Color CodeAssignments Dispatch Position ConnectionsModem Installation Printer Installation13 CPU Relay Panel 14 14 Card Relay Panel PA System Feed Connections to AC PowerConsole Arrangement IntroductionTools Required Tions Console Leveling Main Console AssemblyHoles Writing Support Rail Mounting Formica Writing Surface ARRANGE- MentWriting Support Rail Mounting Attaching the Formica Writing SUR- Face Joining FormicaStabilizer KIT Option Formica Writing Surface and TrimCabinetry Options Mounting Option Adjustable Keyboard Seat OP- TionUniversal Keyboard Drawer PIE Support Rail Mounting OP- Tion Typewriter Extension Assemblysembly OptionUniversal Pencil Drawer MOUNT- ING Option MountingCRT Monitor Shelf FXM-192 OP- Tion 16 PIE Support Rail Mounting18 CRT Monitor Shelf Monitor Shelf Hardware Slide Tray Hardware Install the PC/UPS Slide Tray -1 PC UPS Option NumbersCRT Interface Processor CIP -3 Power Supply Hardware Install the CIP Power SupplyCIP Tray Hardware Install the CRT Interface PROCE- SOR CIP TrayCIP Tray with Microphone CIP Tray Cable Connections This page intentionally left blank Tions Install the PC and UPSPC UPS Options Connect the PC CPU and PC UPS POW- ER CordsRefer to -2and Table Connect the CRT Interface Processor CIP Tray CablesInstall CRT Touchscreen Option TDV-OP492 Install the CRT MonitorVolume Control Hardware Install CRT Trackball OPTION/ Mouse OptionInstall Headset Jack Options TDV- OP406, 407 Install Second Volume Control KnobConnector Headset SET UP and Operation of the HEAD- SET JackThis page intentionally left blank Initial POWER-UP and CHECK-OUT Equipment CHECK-OUT and AdjustmentsConsole Adjustments CPP AdjustmentsAlign the CRT Touchscreen with the PC Computer Headset Receive LimitAfter System CHECK-OUT Screen

VR-CM50 specifications

The EFJohnson VR-CM50 is a state-of-the-art mobile communications solution designed for first responders and public safety agencies. This versatile device is engineered to enhance communication efficiency and reliability, ensuring that users can stay connected in critical situations.

The VR-CM50 features a rugged design, built to withstand the harsh environmental conditions often encountered by emergency personnel. It meets military specifications for durability, including shock, vibration, and water resistance. With a lightweight and compact form factor, the VR-CM50 is easy to install in various vehicles without compromising the available space or mobility.

One of the standout technologies in the VR-CM50 is its advanced digital trunking capability. The device operates on multiple frequency bands, allowing for seamless communication across various networks. This flexibility is crucial for interoperability among different agencies, especially during joint operations or mutual aid scenarios.

The VR-CM50 also offers enhanced audio quality, ensuring that users can clearly hear and be heard even in noisy environments. Its digital signal processing technology minimizes background noise and enhances voice clarity. This feature is vital for first responders who often communicate in high-pressure situations where every word counts.

Another key characteristic of the VR-CM50 is its integration with a wide range of communication systems. The device is compatible with various communication protocols, enabling connection with existing infrastructure. This adaptability allows agencies to leverage their current resources while benefiting from the latest technological advancements.

The VR-CM50 promotes user safety with built-in emergency features. It includes a dedicated emergency button that, when pressed, instantly alerts dispatchers and other personnel of the user's location and status. This feature is particularly beneficial for officers on patrol or in isolated areas, enhancing their safety during critical incidents.

Furthermore, the VR-CM50 supports GPS capabilities, providing real-time location tracking for fleet management and situational awareness. This technology not only improves operational efficiency but also enhances coordination during complex incidents.

In summary, the EFJohnson VR-CM50 is a robust and feature-rich mobile communication solution tailored for public safety professionals. Its rugged construction, advanced digital trunking, superior audio quality, and integration capabilities make it an essential tool for effective communication in the field. By fostering interoperability and user safety, the VR-CM50 stands as a reliable choice for agencies striving to enhance their emergency response capabilities.
Top Page Image Contents