5748010000
How to dehumidify
How to dehumidify
1) Plug the appliance into a mains socket.
| Dehumidifying |
| standby light |
Humidistat | Function |
knob | |
| selector |
Tank full/ tank missing
2) Check that the “tank full/tank missing” light 
is off, if not place the tank in the correct position or empty it if it’s necessary.
3) To easily select the right humidity level, we suggest you operate
as follows: |
|
|
Use the function selector to choose | (for maximum dehumidi- | |
fying power) or | (for minimum dehumidifying power). | |
Turn the humidistat clockwise as far as it will go to the MAX position.
(The dehumidification standby light 
comes on for the first 3 minutes after which the appliance starts dehumidifying).
Leave the unit on this setting until signs of excess moisture (e.g. condensation on windows) decrease.
At this point select 
or 
and slowly turn the humidistat knob
How to heat
1)Plug the appliance into a mains socket.
2)It is possible to adjust the room temperature by turning the thermostat knob on one of the available position
MAX). If you wish to heat the room, set the thermostat to the |
| |||
temperature level desired. |
|
| ||
3) Select the economy ( | = 1250 W) or maximum ( | = 2000 |
| |
W) heating level on the function selector. |
|
| ||
To easily select the right temperature level, we suggest you to |
| |||
operate as follows: |
|
|
| |
Turn the thermostat to position MAX |
|
| ||
When the temperature in the room has reached the required |
| |||
fig. 4 | ||||
level, slowly turn the thermostat knob anticlockwise until the heat- | ||||
| ||||
ing light goes out. |
|
|
| |
The thermostat will then keep the temperature in the room at the |
| |||
| 5 |
| Dehumidifier | |