Operating Instructions, Indicator Light Function

Operating Instructions

Circuit d’alimentation électrique - Spécifications

Indicator Light Function:

Power Light (Green):

When the unit is first connected to an electrical outlet, the (green) power light starts to flash and continues to flash until the “on/off” button is pressed. When the “on/off” button is activated, the flashing (power) light turns to a steady state “on” condition. The dehumidifier will automatically default to the factory default setting. (See Factory Default Setting for details)

IMPORTANT NOTE: Depending on the humidity conditions of the surrounding environment, the dehumidifier may not start automatically when the “on/off” button is pressed.(see dehumidifier operating instructions for details)

In the event of a power failure, the unit will not re-start automatically when power is restored. To re-start the unit you must press the "on/off" keypad again.

Water Full Indicator Light (Red):

When the water tank is full and /or incorrectly positioned inside the cabinet, the (water full) red light turns on and remains on until such time the tank is emptied and/or correctly re-positioned. This condition will result in the immediate shut down of the dehumidifying system. (both compressor and fan motor operation are terminated) This is a safety feature. When the water tank is emptied and/or correctly re-positioned, the dehumidifier will resume operation automatically. NOTE: It may take several minutes before operating conditions resume.

Factory Default Setting:

Each time the unit is disconnected/re-connected and/or in the event of a power failure, the electronic circuit board automatically defaults to the following factory setting.

Humidity Setting: 60%

Fan Speed: Low

NOTE: In the event of a power failure, all previous settings are automatically erased/cancelled. If your program setting was different than the above (default setting) it will be necessary to re-program your settings. When the unit is switched "Off” manually (using the on/off keypad) the unit will always default to the last program setting that was used.

Water Tank Operation:

Proper installation of the water tank is crucial in maintaining reliable dehumidifier operation.

The water tank holds accumulated condensed water and by means of a safety switch controls both the water level and operation of the dehumidification process.

i.e. When the water tank is full and/or accidentally displaced inside the cabinet, the float switch actuator (inside the tank) breaks contact with the safety switch. This condition results in the immediate shut down of the compressor and fan motor system, preventing moisture from being condensed.

IMPORTANT: Never tamper with or attempt to defeat the water level (safety) float switch system.

1.Tout câblage doit être réalisé par un électricien qualifié, en conformité avec les prescriptions des codes national et local régissant les installations électriques. Pour toute question au sujet des instructions qui suivent, contacter un électricien qualifié.

2.AVANT l’installation et AVANT l’utilisation de cet appareil, contrôler les caractéristiques de la source d’électricité, et résoudre tout problème affectant le câblage.

3.Pour la sécurité et la protection des utilisateurs, cet appareil est relié à la terre lorsqu’il est branché sur une prise de courant de même configuration que la fiche de branchement. En cas de doute quant à la qualité de la liaison à la terre de la prise de courant, consulter un électricien qualifié. NE JAMAIS

UTILISER UN CÂBLE DE RALLONGE NI UN ADAPTATEUR SI LA CONFIGURATION DE LA FICHE DE BRANCHEMENT NE CORRESPOND PAS À CELLE DE LA PRISE DE COURANT.

4.La plaque signalétique de l’appareil est située sur la paroi arrière du compartiment du réceptacle à eau; on y trouve les caractéristiques électriques et techniques spécifiques de cet appareil.

5.Pour éviter les risques de dommage corporel, on doit toujours débrancher l’appareil de la source d’électricité avant d’entreprendre des travaux de nettoyage ou d’entretien.

Spécifications de l’appareil:		DDR2506
	Capacité de déshumidification (Pintes/Litres)	25/11.8

	Alimentation électrique	115 Volts / 60 Hz

	Consommation d’énergie (watts)	490

	Demande de courant nominale

	• Déshumidification	4.5

	Débit de circulation d’air maxi (pieds cubes par minute)	118
	Type de réfrigérant	R22
	Capacité du réceptacle à eau (litres)	5 / 10.55

	Niveau de bruit en fonctionnement (dB A)	50
	Dimensions (largeur/hauteur/profondeur)	13-3/8 x 19-15/16 x 10

	Poids net (kg/lb)	14.5/32

NOTE: Les spécifications sont sujettes à modification sans préavis (pour l'amélioration des produits).

DDR2506 specifications

The Danby DDR2506 is a robust dehumidifier designed to tackle high humidity levels, ensuring a comfortable atmosphere in various spaces. It is particularly effective for areas up to 2,500 square feet, making it ideal for medium to large basements, living rooms, or commercial settings. With its sleek design and user-friendly interface, this model stands out in both functionality and aesthetics.

One of the main features of the Danby DDR2506 is its impressive moisture removal capability, extracting up to 25 pints of water per day. This efficiency helps prevent mold growth and protects your belongings from excessive moisture damage. The unit is equipped with an adjustable humidity control feature, allowing users to set their desired humidity level easily. This level of customization helps ensure optimal comfort while saving energy.

The Danby DDR2506 utilizes a reusable, washable air filter, which enhances air quality by removing dust and allergens. Regular cleaning of the filter not only prolongs the unit's lifespan but also maintains its efficiency. Additionally, this dehumidifier features an auto-restart function, which is particularly useful during power outages. When power is restored, the unit resumes its previous settings, providing peace of mind and continuous performance.

In terms of technology, the Danby DDR2506 employs environmentally friendly R410A refrigerant. This refrigerant not only meets current regulations regarding ozone depletion but also allows for improved energy efficiency. The energy-efficient design contributes to lower utility bills while still delivering high-performance moisture control.

Another notable characteristic of the Danby DDR2506 is its portable design. It includes built-in handles and easy-roll casters, facilitating movement from room to room or from one location to another. Moreover, the unit has a direct drain option, which enables continuous operation without the need to frequently empty the water tank.

Finally, the Danby DDR2506 comes with a conveniently located top loading bucket that has a capacity of 12.7 pints. The tank also features an indicator light that warns users when it is full, ensuring hassle-free maintenance. In summary, the Danby DDR2506 combines powerful moisture removal with user-centric features, technological advancements, and a portable design, making it an excellent choice for individuals seeking an effective dehumidification solution.