Aprilaire 1730A specifications Specifications, Location Considerations, Unpacking and Contents

Page 1

Model 1730A Compact Dehumidifier Installation Instructions

WARNING

1.120 volts may cause serious injury from electric shock. Disconnect electrical power before starting installation. Leave power disconnected until installation is complete.

2.Sharp edges may cause serious injury from cuts. Use care when cutting plenum openings and handling ductwork.

3.Dropping may cause personal injury or equipment damage. Handle with care.

4.Do not remove the inlet or outlet screen. Both screens are required to protect from moving parts and electrical components.

CAUTION

1.Do not use in pool applications.

2.If unit has been shipped or stored on its side, wait 24 hours before running.

3.Do not use solvents or cleaners on or near the circuit board.

SPECIFICATIONS

Dimensions: Width: 12.5” cabinet, 13” with doors

Height: 14.5” cabinet, 17” with 2.5” leveling feet

Length: 22” cabinet, 27” with collars

Weight: 65 lbs.

Capacity: 65 pints/day @ 150 cfm

AHAM DH-1-2003 80°F, 60% RH conditions

Efficiency: 1.8 Liters per kilowatt hour

AHAM DH-1-2003 80°F, 60% RH conditions

Power: 115VAC, 60 Hz, 8A Operating Current

Unit equipped with 8 ft. grounded power cord Dedicated 15 Amp circuit recommended

Airflow:

 

 

P ("w.c.)

Airflow (cfm)

 

 

0

230

 

0.25

190

 

0.50

150

Inlet Air Operating Conditions: 60°F to 95°F, 30% RH to 99% RH

Installation Conditions: 40°F to 140°F, 0% RH to 99% RH

Evaporator Frost Sensor: 25°F +/- 5°F, circuit opens (cut-out) 55°F +/- 5°F, reset temperature (cut-in)

Filter: MERV 8, washable

Dehumidistat Control Accuracy: +/- 6%RH with +/-6% Differential

LOCATION CONSIDERATIONS

1.Install Unit Indoors: Do not expose to elements.

2.Drain Accessibility: If a drain is not located in the installation area, a condensate pump may be required.

3.Power: Dedicated outlet within 8 feet of unit.

4.Filter Access: Allow for 12” clearance on one side of the unit for removal of filter. (Figure 1)

5.Inlet: If inlet is not ducted, a minimum of 6” of open space is required from the inlet panel to an adjacent surface.

Figure 1 – Filter

TOP VIEW

6" MINIMUM CLEARANCE

 

FOR PROPER AIR FLOW

Access Clearance

 

 

FILTER

 

12" MINIMUM CLEARANCE

 

FOR FILTER

 

 

 

 

(EITHER SIDE)

90-1426

UNPACKING AND CONTENTS

Do not tip unit to remove from carton.

1.Open carton completely using cut line shown along bottom perimeter of carton.

2.Remove all cardboard inner pack (top edges and duct collars).

3.See Figure 2 for opening view and contents.

a.Installation Manual

b.Owner’s Manual

c.Dehumidistat (mounted to inlet panel)

d.Bag with Dehumidistat Cover Plate, Screws (2), Anchors (2)

e.Outlet with Back Flow Damper

f.8 ft. Grounded Power Cord

g.Wiring Access Panel

Figure 2 – Carton

a

b

 

Opening & Contents

c

 

 

 

 

 

 

d

 

e

 

g

 

f

 

 

 

 

90-1464

 

 

 

Image 1
Contents Unpacking and Contents SpecificationsLocation Considerations SET-UP Mechanical InstallationDucting Ducted InstallationWiring Dehumidistat to Unit Wiring Dehumidistat Wall Mount Installation FigureWiring Instructions Float SwitchReplace the wiring access panel Start UP/SYSTEM CheckoutSymptom Possible Reason/Troubleshooting Procedure Troubleshooting GuideSequence of Operation Research Products Corporation
Related manuals
Manual 4 pages 24.12 Kb

1730A specifications

The Aprilaire 1730A is a high-efficiency dehumidifier designed to create a comfortable living environment by effectively removing excess moisture from the air. This unit is particularly well-suited for basements and other areas prone to dampness, providing homeowners with a reliable solution to combat humidity-related issues.

One of the standout features of the Aprilaire 1730A is its impressive dehumidification capacity, which can remove up to 70 pints of moisture from the air per day. This high capacity ensures that even in the most humid conditions, the appliance can maintain optimal humidity levels, typically around 30-50%. This is essential not only for comfort but also for preventing mold growth, structural damage, and maintaining overall indoor air quality.

The 1730A is equipped with advanced technology that enhances its efficiency and performance. It utilizes a highly efficient compressor, resulting in lower energy consumption compared to traditional dehumidifiers. This energy efficiency is not only environmentally friendly but also translates into cost savings on utility bills over time.

Another notable characteristic of the Aprilaire 1730A is its user-friendly controls. The unit features a simple, intuitive interface that allows users to easily monitor and adjust humidity levels to suit their preferences. Additionally, this model includes continuous drainage capability, allowing for hassle-free operation without the need to empty the water tank frequently.

The design of the 1730A also incorporates a durable and robust construction, ensuring that it can withstand the demands of continuous operation. This dehumidifier is designed for either freestanding or ducted applications, providing flexible installation options to meet the specific needs of any home.

Furthermore, the Aprilaire brand is known for its commitment to quality, and the 1730A is no exception. It comes with a manufacturer’s warranty, giving homeowners peace of mind regarding their investment.

In conclusion, the Aprilaire 1730A dehumidifier stands out for its substantial moisture removal capacity, energy efficiency, user-friendly controls, and durable design. These features make it an ideal choice for homeowners seeking effective humidity control in their living spaces, particularly in basements and other moisture-prone areas.