Warranty, Annually minimum, Daily, Weekly

Instruction Manual – Model AFG Oil Burner

Service & maintain burner

Owner’s information

Owner service and maintenance

This burner must be installed, adjusted and started only by a quali- fied service agency — an individual or agency, licensed and experienced with all codes and ordinances, who is responsible for the installation and adjust- ment of the equipment.

•Have your equipment inspected and adjusted at least annually by your qualified service agency to assure continued proper operation.

•Installation and adjustment of the burner requires technical knowledge and the use of combustion test instruments. Do not tamper with the unit or controls. Call your qualified service agency.

•Incorrect operation of the burner could result in severe per- sonal injury, death or substantial property damage.

The following could result in fire hazard, severe personal injury, death or sub- stantial property damage. Read carefully.

•Never attempt to use gasoline in your heating appliance.

•Never store gasoline or combustible materials near the burner or appliance.

•Never attempt to burn garbage or refuse in your appliance.

•Never attempt to light the burner/appliance by throwing burning ma- terial into the appliance.

•Never attempt to use crankcase or waste oil or material other than the approved fuel oils in this burner.

•Never restrict the air inlet openings to the burner or the combustion air ventilation openings in the room.

Properly installed and maintained, your AFG burner will provide years of effi- cient, trouble-free operation. Please take care of your equipment by following the warnings provided and by doing the following (notify your qualified service agency if you find anything wrong):

Annually (minimum)

•Have your burner/heating appliance serviced at least annually by your quali- fied service agency as noted above.

Daily

•Check the room in which your burner/appliance is installed. Make sure:

•air ventilation openings are clean and unobstructed

•nothing is blocking the burner inlet air openings

•no combustible materials are stored near the heating appliance

•there are no signs of oil or water leakage around the burner or appliance.

Weekly

•Check your oil tank level. Always keep your oil tank full, especially during the summer, in order to prevent condensation of moisture on the inside surface of the tank.

Warranty

Beckett warrants its equipment specifically to those who have purchased it for resale, including your qualified service agency (dealer). In the event of any prob- lems with your equipment or its installation, you should contact your dealer for assistance.

The OilHeat Manufacturers' Association supports the use of low sulfur fuels as defined by ASTM D396, Grades Number 1 Low Sulfur and Number 2 Low Sulfur, as the preferred heating fuel for the following reasons:

•Low sulfur fuels reduce deposits on heat exchanger surfaces, extending the service interval between cleanings.

•The reduced deposits increase the efficiency of the appliance.

•Low sulfur fuels reduce particulate emissions.

•Low sulfur fuels reduce oxides of nitrogen emissions.

U.S.A.: P. O. Box 1289 • Elyria, Ohio 44036

Canada: R. W. Beckett Canada, Ltd. • Unit #3, 430 Laird Road • Guelph, Ontario, N1G 3X7

Subject to change without notice. Printed in U.S.A.	035-18783-001 Rev. A (0803)
Copyright © by York International Corp. 2002. All rights reserved.	Supersedes: Nothing

Unitary

5005

Norman

Products

York

Group

Drive

73069

Form Number 6104BAFG R1001

Printed in U.S.A.

AFG Oil Burner specifications

The Beckett AFG Oil Burner stands as a top choice for residential and commercial heating applications, recognized for its reliability, efficiency, and innovation. Engineered to deliver optimal performance, this burner has become a market favorite among HVAC professionals and homeowners alike.

One of the standout features of the AFG Oil Burner is its advanced technology for efficient fuel combustion. The burner employs a unique air-fuel ratio control system, which ensures precise mixing of air and oil for maximum efficiency. This not only enhances heating performance but also contributes to significant fuel savings, making it an environmentally friendly option.

The Beckett AFG is designed with a compact, lightweight structure, facilitating easy installation and maintenance. Its proprietary design minimizes noise levels during operation, providing a quiet heating solution ideal for residential settings. The burner also features an automatic reset capability, which enhances safety by shutting off in the case of an operational fault, thus preventing potential hazards.

Another noteworthy characteristic of the AFG Oil Burner is its versatile application range. It supports various oil types, including No. 1 and No. 2 fuel oils, making it suitable for different heating requirements. The burner’s adaptability extends to various applications, including forced hot air, hot water boilers, and steam systems.

In terms of performance, the AFG model boasts impressive firing rates, providing up to 3.5 GPH, suitable for both small homes and larger commercial establishments. Its ability to maintain consistent fuel flow helps reduce wear and tear on the heating system, extending its longevity.

The user-friendly feature of the Beckett AFG includes an advanced ignition system that ensures quick and reliable startups. This system dramatically decreases the risk of ignition failures, providing peace of mind for users.

Furthermore, Beckett's commitment to quality is evident in the robust construction of the AFG Oil Burner. Made from high-grade materials, this burner is built to withstand the rigors of frequent operation.

In summary, the Beckett AFG Oil Burner is a high-performance, energy-efficient solution that combines advanced technology, safety features, and versatile applications. Its dependability and efficiency make it an excellent investment for anyone seeking effective heating solutions.