PROGRAMMER OPERATING INSTRUCTIONS
TO SET PRESENT TIME AND DAY
Set right switch to RUN.
Press HR & MIN buttons together (until colon stops flashing)
After 15 seconds the colon will start flashing again signifying the settings cannot be changed. Repeat this step if you still want to set time and day.
Press DAY button until arrow points to correct day.
Press HR and MIN buttons separately until correct time is displayed.
Set right switch to DHW then back to RUN (or leave for 15 seconds) to start the clock.
Permanent off |
| Fig. 2. |
| Normal run mode | ||
Timed programme |
|
|
|
|
| Set DHW programme |
Permanent on | I AUTO O | RUN DHW CH | Set CH programme | |||
| ||||||
|
| |||||
Monday to Sunday |
|
|
|
|
| Channel 1 (DHW) |
M | T W | Th F | S | Su | Channel 2 (CH) | |
|
| 8:37 | 3 | |||
|
|
| ||||
Actual time or set time |
|
|
| 1 2 |
| |
|
|
|
|
|
| |
|
|
|
|
|
| Demand symbol (light bulb) |
|
| DAY | HR | MIN | ADV | Advanced symbol |
| P |
| ||||
Step through programme |
|
| Set |
|
|
|
|
|
|
|
|
| |
|
|
| Reset |
|
| Programmer step number |
|
|
|
|
|
| Advance button |
Set actual or | Set time or |
|
| Set time or | ||
programme day | programme hours |
|
| programme minutes | ||
TO SET PROGRAMME TIMES
This programmer provides eight switch periods per channel, with a day selection of Mon...Fri, Mon...Sat, Sat/sun, all days together or all days individually. If it is considered confusing to programme all variations, the following describes two levels of setting the programme; simple or
SIMPLE PROGRAMME SETTING
The programmer has an
PROGRAMME STEP | STANDARD PROGRAMME | ||
| DHW |
| CH |
|
| ||
|
|
|
|
1 | 6.30am |
| 6.30am |
|
|
|
|
2 | 8.30am |
| 8.30am |
3 | 4.30pm |
| 4.30pm |
4 | 10.30pm |
| 10.30pm |
|
| ||
5 | 7.00am |
| 7.00am |
6 | 9.00am |
| 9.00am |
7 | 4.00pm |
| 4.00pm |
8 | 11.00pm |
| 11.00pm |
|
|
|
|
2