Step-by-step how to do it

Bryan KnockdownTM boilers

Disassembly

1.RV Series boiler shown. This is KD-4 condition as the boiler is delivered to the job site.

2.After unbolting clips remove burner.

3.Remove control devices, gauges and valves, jacket access doors and panels. Jacket panels are fastened with single screws.

4.Flanges are color coded with their mates to make correct reassembly easy. White stripes guide accu- rate realignment.

5.Jacket frames are tack welded and coded for easy reassembly. Break tack welds and remove frame.

6.Remove tube panels (secured by bolts and angles) tube clamps, and back flue panel (tack welded).

7.Remove baffles and with tube puller furnished, remove tubes. Remove flue collector end panels.

8.Remove bolts holding up- per tube header and remove pressure vessel assembly using permanent lift lugs on the assembly.

Reassembly

9.Transport components through doors to boiler site for reassembly. Install monoblock insulation in floor frame, mix cement reinforced with stainless steel needles, pour refractory base in floor frame.

10.Matching flange colors reas- semble pressure vessel. Pre- pare tube holes and install tubes.

11.Install tube clamps. Install flue collector panels, position tube panel frame and weld into place.

12.Insert baffles and install flue collector back and side panels. Install flue collector top. Install tube panels.

13.Seal weld entire flue collec- tor to prevent flue gas leaks. Reassemble jacket frame- work following color codes and aligning tack welds, then weld into place.

14.Apply insulation all around and secure.

15.Attach jacket panels to frame- work.

16.Install burner, pack around head with ceramic blanket.

17.Install control devices using pre-drilled holes and outlet openings. Install control panel.

18.Wire controls into burner panel.

CLM-300 71, CLM-270 64, CLM-210 50, CLM-150 36, CLM-240 57 specifications

Bryan Boilers is renowned for its innovation and efficiency in the manufacturing of water and steam boilers, and the CLM series is a prime example of this commitment. Among the models in the CLM lineup are the CLM-150 36, CLM-240 57, CLM-270 64, CLM-300 71, and CLM-180 43. Each of these models is expertly engineered to deliver superior performance, making them ideal for a range of commercial and industrial applications.

Starting with the CLM-150 36, this model has a unique capability to produce a maximum of 150 horsepower with an impressive efficiency rating. It features a compact design that fits well in tight spaces while still delivering robust performance. The advanced control system allows for precise monitoring and adjustment of key parameters, ensuring optimal operation and fuel efficiency.

Next, the CLM-240 57 offers a step up in power, delivering 240 horsepower. This model is equipped with high-quality insulation, which enhances efficiency by minimizing heat loss. It also incorporates a water-level control system that ensures continuous operation without the risk of overheating or damage.

The CLM-270 64 further increases capacity and efficiency with 270 horsepower. A standout characteristic of this model is its flexible burner options, which can accommodate a range of fuels, including natural gas, propane, and oil. This versatility makes it an attractive choice for facilities looking to optimize fuel use based on availability and cost.

The CLM-300 71 is a powerhouse, boasting 300 horsepower capacity. This unit is designed for high-demand applications, featuring an innovative fire-tube design that enhances heat transfer efficiency while reducing emissions. The easy-to-use digital control panel allows operators to manage system performance with exceptional precision.

Finally, the CLM-180 43 is another versatile option, with a capacity of 180 horsepower. This model is praised for its low-maintenance requirements and durability, ensuring long service life with minimal operational interruptions. Its efficient heat exchangers optimize thermal performance, making it an excellent choice for various heating needs.

Each model in the Bryan Boilers CLM series showcases advanced engineering, environmental consciousness, and reliability. Technologies such as programmable controls, high-efficiency heat exchangers, and versatile burner options make these boilers stand out in the marketplace, ensuring they meet the evolving needs of today's energy-conscious users. Overall, the CLM series combines quality, performance, and adaptability, making it an exceptional choice for those in need of dependable heating solutions.