Aarrow Fires Stratford Ti, Stratford Tf installation manual Over-Firing, Cleaning, Accessories

Page 13

OPERATING INSTRUCTIONS

ASH REMOVAL

The ash pan should be emptied at least twice a day or when the level of ash reaches the top of the ash pan. On no account should the ash be allowed to build up to touch the grate as this will greatly shorten its life.

DE - ASHING

It is necessary to maintain an ash layer on the upper surface of the grate bars, in order to protect them so de-ashing should cease as soon as the first red embers drop into the ash pan. Further de-ashing will cause heat build-up under the grate, which will considerably shorten its life. This operation should be carried out with the doors closed to prevent dust escaping into the room.

•Move up and down vigorously the riddling lever (ash will fall into the ash pan beneath the grate). •When de-ashing is complete re-set grate to

previous position.

• Empty ash pan.

Note: Do not force the riddling lever.

TO EMPTY THE ASH PAN

Open the fire door; open the ash door. Fit the fork end of the operating tool into the ash pan and remove from the ash pit chamber.

WARNING: The ash can be very hot. Empty only to a metal container. Even if the ash appears cold, red-hot pieces of ash may be concealed and could easily start a fire or cause an injury. Replace the ash pan and close ash door. Close the fire down.

CLINKER

The formation of clinker suggests that the unit is being over-fired. Any clinker forming on the grate should be removed when cold.

OVER-FIRING

Do not over fire your appliance. Using flammable liquids or too much wood or firing the fire at maximum for prolonged periods may result in over-firing. If the chimney connector or casing glows red it is being over-fired. If this occurs immediately close all air inlets to the appliance to reduce the air supply to the fire. Should a chimney fire occur immediately close the appliance down. Get everyone out of the house and call the fire

brigade. A chimney fire may cause structural damage of the chimney. Do not use the appliance until the chimney and connector have been inspected and any damaged parts repaired or replaced. This should be done by a competent person such as a HETAS registered engineer.

CLEANING

IMPORTANT

Under some circumstances soot can quickly build up on the throat plate and adjacent areas. The throat plate should be removed and checked monthly, and any debris stripped off. Similarly, clean the upper surface of the firebox.

Refer to page 16 for instructions on throat plate removal/inspection.

IF ASH BUILDS UP AROUND THE THERMOSTAT OPENING.

1.Make sure the fire is unlit and cold. 2.Remove the access plate. (See page 19) Carefully clean the cold ash from the thermostat using a vacuum cleaner. Re-fit the access cover. Also the area to the left hand side of the firebox should be swept clean.

WARNING PERFORM THESE OPERATIONS WHEN THE STOVE IS UNLIT AND COLD.

ACCESSORIES

STANDS

Elegant stands are available for the Stratford free-standing fires. (Stands are not available for the inset models). These increase the height of the appliance and rear flue outlet by approximately:

Tf 30 by 125mm

Tf 50 by 130mm

Tf 70 by 135mm

Tf 90 by 140mm

TRACERIES

For added decorative effect, beautiful door traceries are available for the complete Stratford fires range.

PAINT

Matching aerosol paint to tone in any connecting flues, pipes or surrounding metalwork.

Stratford Tf & Ti Multifuel Boiler Stoves

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Stratford Tf & Ti Multifuel Boiler Stoves Copyright Contents Petroleum Coke Principle of the Fire Introduction SafetyPart Description Stratford Visual Aid Tf 30b Check ListTf 70b Not to scaleStratford Tf 30b Tf 50b Technical Data1kW = 3420 BTU’s 25.4mm = 1 inch Aarrow AIR Wash System Operating Instructions Multifuel GrateAIR Inlet Controls Thermostatic ControlMulti Purpose Operating Tool Operating Instructions Interlock SystemRiddling Door TrimOperating Instructions Door AdjustmentFuel Retainer Bars Lighting the Fire Operating Instructions Fuel TypesRecommended Reading Burning Wood Overnight BurningMixed Fuels AnthraciteAccessories CleaningOVER-FIRING Chimney Sweeping Servicing MaintenanceDoor Glass Outer FinishInstallation General Precautions Grate BAR Replacement Installation Multifuel GrateAssembling the Grate Throat Plate InspectionFlues and Chimneys Installation Fitting the Flue Outlet and HOT PlateFor ALL Appliances InstallationAdjustment Thermostat Installation Integral BoilersSee below if adjustment is required To fit/remove thermostat on Tf modelsFlue Builders Opening / Chimney BreastInstallation Installation Installation Stratford Tf & Ti Multifuel Boiler Stoves Boiler Tapping Positions Boiler Tapping Positions Stratford Ti 40 Inset Boiler Tapping Positions Heating systems Installation Water ConnectionsHOT Water Systems HOT Water SystemsChecklist Tf 90b Part DescriptionParts List Comb Customer Registration GuaranteeStamp is required Date of Visit Company Work Carried Out Signature Service RecordFinal Factory Check List ’ve checked it and it’s O.K

Stratford Tf, Stratford Ti specifications

Aarrow Fires is renowned for its innovative and high-quality heating solutions, particularly the Stratford Ti and Stratford Tf models. These contemporary wood-burning stoves combine advanced technology with aesthetic appeal, making them excellent choices for both functionality and style in any home.

The Stratford Ti model is distinguished by its sleek design and robust construction. It features a large glass window that provides an unobstructed view of the burning flames, creating a warm and inviting atmosphere. One of the standout characteristics of the Stratford Ti is its efficiency. With an impressive efficiency rating, this stove ensures that more heat is generated from every log used, which means less frequent reloading and better fuel economy. The air wash system helps to keep the glass clean, maximizing the visual experience and reducing maintenance.

The Stratford Tf, on the other hand, is an equally impressive model with unique features that cater to diverse heating needs. It is designed with a wider firebox, allowing for larger logs and longer burn times. This characteristic makes it ideal for those who prefer a more extended heating experience without the need for constant refueling. The Stratford Tf also incorporates Aarrow's primary and secondary air controls, which provide users with greater control over the burn rate and heat output.

Both models employ cutting-edge technologies, including a sophisticated combustion system. This system ensures that fuel is consumed efficiently, resulting in fewer emissions and enhanced environmental performance. The stoves meet stringent eco-friendly standards, making them a sustainable choice for modern homes.

In terms of aesthetics, the Stratford Ti and Tf models excel with a variety of finishes and options, including traditional and contemporary styles. Whether placed in a rustic cabin or a modern apartment, these stoves complement any interior decor.

Safety is another priority for Aarrow Fires, as both stoves are designed with robust features to ensure safe operation. Built-in heat shields and proper airflow designs help minimize the risk of overheating and ensure that the surrounding areas remain cool to the touch.

In summary, the Aarrow Fires Stratford Ti and Tf models represent the best in wood-burning stove technology. With their impressive efficiency, stunning design, and user-friendly features, these stoves are perfect for anyone seeking a reliable heating solution that adds value and warmth to their living space.
Top Page Image Contents