Using a Shower HE CB25/33 only | Alpha Tool.Com.HK Limited HE CB33

7 USING A SHOWER - HE CB25/33 only

Thermostatic or pressure equalising type - When using these types of shower set the boiler domestic hot water thermostat to maximum. The shower should then maintain a relatively constant temperature.

Manual bath mixer type shower - When using this type of shower set the boiler domestic hot water thermostat to setting 7, This should avoid excessive temperatures at the shower.

Note: If you get unacceptable temperature variations with this type of shower, then a thermostatic or pressure equalising type should be used.

8 IMPORTANT NOTES

1.BOILER LOCATION

Always ensure the following clearances are available around the casing of the boiler:-

Top: 220 mm, Bottom: 250 mm, Each side: 5 mm, Front: 450 mm

Do not store any other articles in the cupboard containing the boiler and never place any clothing or combustible material on or near the boiler or flue pipe.

2. FLUE TERMINAL

The terminal on the outside wall must not be allowed to be obstructed. If it is damaged, in any way, turn the boiler off and contact your Service Engineer.

Note: The Alpha HE boilers are high efficiency boilers and when operating vapour will be emitted from the terminal. This is safe and quite normal.

3. MAINS FAILURE

In the event of an electrical supply failure the boiler will not operate. When the supply is restored, the boiler will return to normal operation. Remember to reset the clock when the supply is restored.

HE CB25/33 only - If the mains water supply fails, there will be no hot water from the taps. The boiler will continue to provide central heating.

4. ADDITIONAL BATHROOM FITTINGS - HE CB25/33 only

Any equipment such as mixing valves, showers, bidets etc. must be designed to operate at mains water pressure. Contact your plumbing merchant or installer for advice when considering purchasing such items.

5. CLEANING

Use only a damp cloth and mild detergent to clean the boiler outer casing. Do not use abrasive cleaners.

6. SERVICING

To maintain efficient and safe operation of your boiler, routine annual servicing is essential.

For advice on servicing contact:- The Alpha Helpline: 0870 3001964

7. GAS LEAK

If a fault or gas leak is suspected, turn off the gas supply. Do not touch any electrical switches, do not smoke and extinguish all naked flames. Contact your local Gas Region immediately.

8. ELECTRICAL SUPPLY

The boiler requires a 230/240 V ~ 50 Hz supply, fused at 3 A if a 13 A 3-pin plug is used or a 5 A fuse if any other type of plug is used.

To connect a plug:-

The colour of the wires in the mains lead of the boiler may not correspond with the coloured markings identifying the terminals in your plug. In this case proceed as follows:-

The wire coloured green and yellow must be connected to the terminal in the plug that is marked with the letter E, or by the earth symbol , or coloured green or green and yellow.

The blue wire must be connected to the terminal which is marked with either the letter N or coloured black. The brown wire must be connected to the terminal which is marked with the letter L or coloured red.

THE APPLIANCE MUST BE EARTHED.

Alpha HE CB/SY

HE CB33, HE SY25 specifications

Alpha Tool.Com.HK Limited has emerged as a key player in the construction machinery market, particularly known for their compact and efficient machines. Among their impressive lineup, two standout products are the HE SY25 and HE CB33. These models cater to a diverse range of construction needs, boasting advanced technologies and exceptional performance characteristics.

The HE SY25, a compact mini excavator, is designed to offer versatility and efficiency in tight workspaces. Its powerful engine and hydraulic system are engineered to provide a high level of performance, ensuring that tasks such as digging, lifting, and trenching are executed with ease. With a maximum digging depth of around 2,300 mm and a bucket digging force of 20 kN, the SY25 demonstrates impressive excavation capabilities. The machine is also equipped with a surprisingly compact design that enables operators to maneuver in confined areas, making it ideal for urban construction projects.

In terms of technology, the HE SY25 features user-friendly controls and an ergonomic design, enhancing operator comfort and productivity. Its advanced hydraulic system offers smooth and precise movements, allowing for better control during operations. The cabin is designed with visibility in mind, providing operators with a clear view of the working area, which is crucial for safety and efficiency.

On the other hand, the HE CB33 is a versatile and robust compact loader that distinguishes itself with its exceptional load capacity and stability. With a rated operating capacity of approximately 1,400 kg, the CB33 offers reliable performance for various tasks, including material handling, construction, and landscaping. The machine's low center of gravity ensures stability during operation, which is particularly beneficial when working on uneven terrain.

The HE CB33 is equipped with a powerful engine, providing the necessary torque and power for demanding tasks. Additionally, its intuitive controls and quick coupling system enhance workflow, allowing for the rapid attachment and detachment of implements. This flexibility makes the CB33 an invaluable asset on any job site.

Both the HE SY25 and HE CB33 feature durable construction, ensuring longevity and resilience even under the toughest working conditions. With their impressive combination of power, efficiency, and user-friendly design, these models from Alpha Tool.Com.HK Limited are well-suited for addressing the diverse challenges faced in modern construction environments. As the industry evolves, these machines stand out as reliable tools for professionals looking to enhance productivity and job effectiveness.