Iluv I177 instruction manual Using the Alarm Function, Adjusting the Brightness of LCD Screen

Page 8

OPERATIONAL INSTRUCTIONS

Using the Alarm Function

1.To preview the alarm time, press the ALARM 1 or ALARM 2 buttons once.

2.To deactivate the alarm, press the ALARM 1 or ALARM 2 buttons once more.

3.To activate the alarm, press the ALARM 1 or ALARM 2 buttons again.

4.To snooze, press the SNOOZE / DIMMER button on the i177 (or on Remote Control), following

the sounding of the alarm. The alarm will then shut off and will sound again in approximately

9 minutes. You will have the opportunity to repeat this cycle many times during a 1 hour allotted alarm cycle.

5.To turn the alarm off, press the POWER OFF button on the i177 (or the POWER ON/OFF button on the Remote Control). If all settings remain the same, the alarm will turn on the following day at the same time. When the alarm is not turned off after it sounds, it will then play for approximately 60 minutes and turn off automatically. This cycle will repeat every 24 hours unless the settings are changed.

6.To prevent the alarm from coming on daily, press the ALARM 1 or ALARM 2 buttons and set to off. Both the Alarm Icon and Wake-to icon will disappear to signal that the alarm is deactivated.

Note:

·Set your iPod to the repeat mode if you’ve selected Wake To iPod, and your iPod has less than one hour of songs.

·If you have selected the Wake To iPod setting, yet no iPod is present or there is no music on the iPod at the alarm time, the i177 will automatically switch to the buzzer mode. If only an iPod shuffle is docked, the Wake to iPod setting will likewise switch to the buzzer mode.

·In order to wake to your iPod, it must be appropriately placed in the built-in universal dock and powered off.

·In the event of a power outage or if AC power is disconnected, when the i177 is powered by the Backup Battery, time and date will not be displayed, however time and date settings will be temporarily saved, but the alarm will not sound.

Adjusting the Brightness of LCD Screen

To adjust the brightness of the LCD screen, press the SNOOZE / DIMMER button during normal operation. Each press will change the brightness level of the LCD screen.

OPERATIONAL INSTRUCTIONS

Setting the Sleep Time

1. To enter into the sleep mode, press the SLEEP button while the i177 is off or while listening to your iPod or the radio. The unit will automatically turn off after the selected time. The sleep mode also has a feature called the “Gentle Sleep”, which gradually decreases the volume.

2.To adjust the sleep time, press the SLEEP button again and choose from 15 to 120 minutes. Pressing the SLEEP button while the sleep function is set to 15 minutes will turn the unit off.

3.To view the sleep time, wait until the display returns to the current time and press the SLEEP button once. It will display the sleep time remaining. Press again to change the sleep time to the next lowest increment.

4.To stop listening at any time, press the POWER OFF button or the POWER ON/OFF button on the Remote Control.

Note: The i177 has the independent volume settings for the sleep mode with no effect on the alarm volume. The sleep volume will remain at the same level until the setting is changed.

12 iLuv

i177 V14M14_IM_EN_09242008

iLuv 13

Image 8
Contents Page Introduction What’s Included?Table of Contents Getting StartedRemote Control First Time Use and Replacing of the Battery Installing the AM Loop AntennaInstalling the Dock Adapter Location of Controls on the Main UnitPower ON/OFF Band / RadioSnooze / Dimmer DownOperational Instructions Setting the Clock TimeSetting the Alarm Time Listening to Your Favorite Songs on Your iPod Charging Your iPodListening to Other Audio Devices Listening to Your Favorite Radio StationSetting the Sleep Time Using the Alarm FunctionAdjusting the Brightness of LCD Screen Troubleshooting Maintenance & Troubleshooting GuideMaintenance Important Safety Instructions User Safety GuideImportant Safety Instructions Cleaning Laser SafetyFCC Notice to a User in USA YOU can Help to Protect the EnvironmentFCC Notice to a User in USA IC Notice to a User in CanadaSpecifications · Power RequirementAdditional Important Instructions GeneralMemo Thank YOU for Your Purchase