Thermostat Buttons and Switches, Display

5 CHECK THERMOSTAT OPERATION

CONTINUED FROM THIRD PAGE

Before you begin programming your thermostat, you should be familiar with its features and with the display and the location and operation of the thermostat buttons. Your thermostat consists of two parts: the thermostat body and the base. To remove the body, gently pull it straight out from the base. To replace the body, line up the body with the base and press gently until the body snaps onto the base.

The Thermostat Buttons and Switches

1(Up arrow) Raises temperature setting.

2(Down arrow) Lowers temperature setting.

3 TIME button.

4PRGM (program) button.

5RUN (program) button.

6HOLD button.

7FAN switch (ON, AUTO).

8SYSTEM switch (COOL, OFF, HEAT).

The Display

9 Indicates day of the week.

10 is displayed when the SYSTEM switch is in the HEAT

position. is displayed (non-flashing) when the SYSTEM

switch is in the COOL position. is displayed (flashing) when the compressor is in lockout mode.

11Alternately displays current time and temperature.

12“LO BATTERY” is displayed when the 2 “AAA” batteries are low and should be replaced. Nothing else will be displayed.

13Displays currently programmed set temperature (this is blank when SYSTEM switch is in the OFF position).

14“HOLD” is displayed when the thermostat is in the HOLD mode.

Operating Features

Now that you are familiar with the thermostat buttons and display, read the following information to learn about the many features of the thermostat.

•SIMULTANEOUS HEATING/COOLING PROGRAM STOR- AGE — When programming, you can enter both your heating and cooling programs at the same time. There is no need to reprogram the thermostat at the beginning of each season.

•TEMPERATURE OVERRIDE — Press or until the display shows the temperature you want. The thermostat will override current programming and keep the room tempera- ture at the selected temperature until the next program period begins. Then the thermostat will automatically revert to the program.

•HOLD TEMPERATURE — The thermostat can hold any temperature within its range for an indefinite period, without reverting to the programmed temperature. Press HOLD

Figure 8. Thermostat display, buttons and switches

button. “HOLD” will be displayed. Then choose the desired

temperature by pressing or . The thermostat will hold the room temperature at the selected setting until you press the RUN button to start program operation again.

•ENERGY MANAGEMENT RECOVERY — Energy Manage- ment Recovery (EMR) causes the thermostat to start heating or cooling early to make the building temperature reach the

program setpoint at the time you specify. Heating will start 5 minutes early for every 1° of temperature required to reach

setpoint. Cooling will start approximately 15 minutes early for every 1° because it takes longer to reach temperature. Clipping W903 jumper will disable EMR.

Example: You select EMR and have your heating pro- grammed to 65° at night and 70° at 7 AM. If the building temperature is 65° the difference between 65° and 70° is 5° .

Allowing 5 minutes per degree the thermostat setpoint will change to 70° at 6:35 AM.

•° F/° C CONVERTIBILITY — The factory default setting is Fahrenheit. Clipping W904 jumper on the circuit board (see fig. 1) will alter this feature to Celsius temperature setting.

•LOW BATTERY INDICATOR — If the 2 “AAA” alkaline batter- ies are low and should be replaced, the display will be blank except for “LO BATTERY”. When the batteries are low, press- ing any button will cause the display to operate for ten seconds. After ten seconds, the display will return to blank except for “LO BATTERY”. After “LO BATTERY” has been displayed for 4 weeks, the thermostat will raise the temperature 10 degrees above your setpoint in COOL mode and will drop temperature 10 degrees below your setpoint in HEAT mode. You cannot program with low batteries, but you can override setpoint temperature.

www.white-rodgers.com

1.00E+78 specifications

The White Rodgers 1.00E+78 is a high-quality thermostat known for its reliability and advanced features. Designed for residential and commercial HVAC applications, this unit offers a seamless blend of functionality, efficiency, and user comfort.

One of the main features of the White Rodgers 1.00E+78 is its precise temperature control. The unit employs advanced sensors that ensure the temperature in a space remains consistent, reducing energy consumption and enhancing comfort. Users can expect to maintain the ideal temperature without experiencing the frequent fluctuations that can occur with lesser models.

Another notable feature is its user-friendly interface. The thermostat is equipped with a large, easy-to-read display that provides clear information about the current temperature, settings, and any alerts. The interface is intuitively designed, allowing users to adjust settings quickly and efficiently, even for those who may not be technologically savvy.

The White Rodgers 1.00E+78 also integrates smart technology, making it compatible with various home automation systems. This connectivity allows users to control their HVAC system remotely via smartphones, tablets, or computers. Such integration not only offers convenience but also contributes to energy savings, as users can adjust settings based on their schedules and usage patterns.

In terms of installation, the White Rodgers 1.00E+78 is designed for easy setup. The unit includes clear instructions and can be connected to most existing HVAC systems without the need for extensive modifications. Additionally, it comes with a battery backup, ensuring that the settings remain intact even during power outages.

The thermostat’s energy-saving features make it an environmentally friendly option. It includes programmable settings that enable users to create heating and cooling schedules, thereby optimizing energy use when the space is occupied and reducing consumption during vacant periods.

Furthermore, durability is a hallmark of the White Rodgers brand, and the 1.00E+78 reflects this commitment to quality. The materials used in the construction ensure longevity, while the design is meant to withstand varying environmental conditions without compromising performance.

In summary, the White Rodgers 1.00E+78 is a standout thermostat that combines advanced technology, ease of use, and energy efficiency. Its reliable performance and smart features make it an excellent choice for those looking to maintain consistent comfort in their living or working spaces while minimizing energy costs.