transmitter like the GE 99001 Portable Transmitter or GE 99004 Home Stereo Receiver/Transmitter to make your audio source
1.Turn on the headset and your
2.When pairing is complete, the blue Pairing LED indicator on the headset will blink steady and slowly. You should now hear the music playing from your transmitter thru the headphones.
3.If the audio source does not automatically pair to the GE 99002, turn off the GE 99002 and the transmitting device, then try again. This will cause the GE 99002 and your phone to loose their connection.
4.Turn on the transmitting device and then the GE 99002 again. While the GE 99002 and your audio device are pairing you will see the Blue LED on the GE 99002 fl ashing quickly. Once your GE 99002 is paired you will see a slow and steady blinking.
Note: Up to two minutes may be required to pair the headset with a
Volume Control
Press and hold the Volume Up or Volume Down button to adjust. You will hear a beep when you adjust the volume to the maximum or minimum sound level.
Advanced Audio Controls
These advanced stereo headphones also provide music playback control for use with
7