General Information, LOG Placement | Empire Comfort Systems 21, 30

GENERAL INFORMATION

Qualiﬁed Installing Agency

Installation and replacement of gas piping, gas utilization equipment or accessories and repair and servicing of equipment shall be performed only by a qualiﬁed agency. The term "qualiﬁed agency" means any individual, ﬁrm, corporation, or company that either in person or through a representative is engaged in and is responsible for (a) the installation, testing, or replacement of gas piping or (b) the connection, installation, testing, repair, or servicing of equipment; that is experienced in such work; that is familiar with all precautions required, and that has complied with all the requirements of the authority having jurisdiction.

The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code,ANSI Z223.1/NFPA54.*

*Available from the American National Standards Institute, Inc. 11 West 42nd St., New York, N.Y. 10018.

State of Massachusetts: The installation must be made by a licensed plumber or gas ﬁtter in the Commonwealth of Massachusetts.

Sellers of unvented propane or natural gas-ﬁred supplemental room heaters shall provide to each purchaser a copy of 527 CMR-30 upon sale of the unit.

LOG PLACEMENT

Before you begin: Do not, handle these logs with your bare hands! Always wear gloves to prevent skin irritation. After handling logs, wash your hands gently with soap and water.

All Logs

The positioning of the logs is critical to the safe and clean operation of this heater. Sooting and other problems may result if the logs are not properly and ﬁrmly positioned in the appliance.

Refer to Figure 1 for the following warning.

Warning: Failure to position the parts in accordance with this diagram or failure to use only parts speciﬁcally approved with this appliance may result in property damage or personal injury.

PROPER INSTALLATION SEQUENCE: VFP(32.36)FP

(Figure 1)

1.Place rear (#1) log onto two (2) pins on rear log support.

2.Place left, front (#2) log onto two (2) left, front pins on burner pan.

3.Place right, front (#3) log onto two (2) right, front pins on burner pan.

4.Place Y Branch (#4) onto 2 pins on rear log.

5.Compare the completed log installation with the appropriate photo from pages 4 and 5. Review previous steps to make any necessary adjustments.

6.Log placement is completed.

Attention: Do not use Figure 1 to order replacement logs. Refer to Page 6 Parts List and Parts View to order logs for your appropriate model number.

Apply loose material (glowing embers) per appropriate Installation Instructions and Owner's Manual. Replacement of loose material (glowing embers) must be purchased from Empire Comfort Systems, Inc. Application of excess loose material (glowing embers) may adversely affect performance of the heater.

WARNING: All previously applied loose material must be removed prior to reapplication.

Replacement Loose Material (glowing embers) Part Number

VFP(32,36)FP	15970
Platinum Bright Embers	PE-20-1

Note: A single layer of embers is to be used when applying Platinum Bright Embers (alone or in combination with production embers) to the burner.

Log Placement

VFP(32,36)FP

Figure 1

The following WARNING applies when log set is installed onto an unvented gas burner assembly.

WARNING: This appliance is equipped for (natural or propane) gas. Field conversion is not permitted.

Page 4

20253-1-0806

21, 30 specifications

Empire Comfort Systems 30,21 is a premier heating solution that exemplifies innovation and efficiency in home heating. This particular model is designed to provide both comfort and reliability, making it a popular choice among homeowners. One of the significant features of the 30,21 is its powerful heating capabilities, offering ample warmth even in the coldest environments. With an impressive BTU output, it ensures that any room stays cozy, regardless of the outside temperature.

A standout characteristic of the Empire Comfort Systems 30,21 is its versatility in fuel options. It can operate using natural gas, propane, or even electricity, giving homeowners the flexibility to choose the energy source that best suits their needs. This adaptability not only enhances user convenience but also helps in achieving optimal energy efficiency.

The 30,21 model is equipped with cutting-edge technology to promote user-friendly operation. A notable feature is the electronic ignition system, which simplifies startup procedures and reduces gas consumption during the ignition phase. Additionally, it features a thermostat system that allows users to maintain a consistent and comfortable temperature in their homes effortlessly. This smart technology helps in lowering energy costs while providing optimal comfort.

Another critical aspect of the Empire Comfort Systems 30,21 is its sleek and modern design. The unit is crafted to seamlessly blend with home decor, providing not just functionality but also an aesthetic appeal. Its compact size makes it suitable for various spaces, from small living rooms to expansive basements. The customizable front options, including different finishes and styles, allow homeowners to choose a look that complements their interior design.

Durability is also a defining characteristic of the Empire Comfort Systems 30,21. Built with high-quality materials, this heater is designed to withstand the test of time, providing peace of mind for users. With proper maintenance, this heating system promises to serve efficiently for many years.

In summary, the Empire Comfort Systems 30,21 heater is an exceptional option that combines impressive heating capacity, advanced technology, and a robust, stylish design. With its energy-efficient options, ease of use, and durability, it stands out as a reliable heating solution for any home. Homeowners seeking comfort and efficiency will find that the Empire Comfort Systems 30,21 meets and exceeds their expectations.