Nady Systems U-800 owner manual Miscellaneous Tips

Page 18

8. MISCELLANEOUS TIPS

•The receiver antennas should be kept away from any metal surfaces whenever possible as they can reflect away or shield the incoming RF signal.

•If the receiver’s volume control is set too high, it may overdrive the input of the attached audio mixer, causing distortion. Conversely, if the output is set too low, the overall signal-to-noise ratio of the system may be reduced, causing noticeable hiss.

If such noise occurs, adjust the output level of the receiver so that highest sound pressure level going into the microphone transmitter causes no input overload in the mixer, but permits the mixer level control to operate in the normal range (not too high and not too low). This provides the optimal signal-to-noise for the entire system.

•Before inserting the batteries, ensure that they are inserted with the correct polarity.

•Before operation, confirm that the receiver and associated transmitter are tuned to the same frequency group and channel number.

•After making a receiver channel change, ensure that the corresponding change is also made on the matching transmitter.

•Use only new alkaline or fully recharged NiMH batteries. Do not use “general purpose” carbon batteries. When batteries are weak, replace all the batteries at the same time. Do not mix new and old batteries.

•Position the receiver so that it has the least possible obstructions between it and the transmitter. Line-of-sight is best!

•During operation, the transmitter and the receiver should be as close as possible for optimum results but never closer than 3 ft. (1 m) as that may overload the receiver’s input circuitry and cause noises.

•If rack mounting the receiver, keep away from heat sources such as amps by allowing enough space between them for adequate ventilation.

•For the best operation, the receiver should be placed at least 3 ft. (1 m) above the ground and 3 ft. (1 m) away from a wall or metal surface. The transmitter should also be at least 3 ft. (1 m) from the receiver. Keep antennas away from noise sources such as motors, automobiles, neon lights, signal processors, computers, as well as large metal objects.

•A receiver cannot receive signals from two or more transmitters simultaneously.

•Turn the transmitter off when it is not in use. For longest life, remove the batteries if the unit is not to be used for a long period as the transmitters draw a tiny residual current to maintain the programmed settings, even when turned off. Also, since batteries installed for a long time can sometimes corrode and/or leak, causing damage, it is generally recommended that batteries be removed whenever the transmitters are not being used.

•When using the bodypack for instrument use: Scratchy noises can sometimes occur when an electric guitar with dirty pots or connections is used with a wireless system. Therefore, the supplied capacitor provides first-order filtering of the RF signal from the cord into the guitar and eliminates virtually all scratchy noises. Should your equipment still produce scratchy noise, we suggest these steps to eliminate problems:

1)Make sure all guitar volume and tone pots are clean and all contacts are solid. This is very important.

2)Solder a 47pF capacitor across the pot to ground terminal of the guitar’s volume and tone pots to provide extra filtering.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 800 Using this Manual IntroductionSystem Features ReceiverQuick User Controls Guide Receiver Front ViewDC Power Supply Adapter 120VAC/22VDC/400mA Simultaneous Multichannel OperationUH-800 Handheld Transmitter Front and Bottom View UB-800 Bodypack Transmitter Front View System Operation Button FunctionRack Mounting the Receiver Adjusting the Mute Level/ RF Squelch Keyboard/Buttons Lock FunctionAudio Level and Peak LED Indicator Connecting the Audio OutputSetting up the UH-800 Transmitter Powering the UH-800 Transmitter On/OffSetting up the UB-800 Transmitter Powering the UB-800 Transmitter On/OffOperating the UH-800 Handheld Transmitter Page Instrument Use UB-800 GT Choosing Group/Channel for the SystemReceiver ASC/IR Sync GR/CH Frequency Receiver/Transmitter ASC IR Sync Manual Programming RF Interference and Finding Open Channels FeedbackNo or Low Audio Consumer AlertMiscellaneous Tips Specifications Overall System PerformanceFrequency Plan UB-800 Bodypack TransmitterFactory Preset Channels User Selectable Channels 11. U-800 Frequency ListsOptional Accessories Service InformationONE Year Limited Warranty This warranty is subject to the following conditionsNady SYSTEMS, INC

U-800 specifications

The Nady Systems U-800 is a professional-grade wireless vocal microphone system designed for performers and speakers who demand clear sound and reliability. With advanced features and robust performance, the U-800 stands out in the crowded market of wireless audio equipment.

One of the key features of the Nady Systems U-800 is its UHF frequency range. Operating within the ultra-high frequency spectrum, this system provides a stable and interference-free signal. This is critical for live performances, as it minimizes the chances of audio dropouts or disruptions, ensuring that artists can deliver their best without technical difficulties.

The U-800 is equipped with a dual-channel receiver that allows for simultaneous operation of two microphones. This flexibility is ideal for duets, panel discussions, or any situation where multiple vocalists or speakers are needed. Each channel has its own volume control, providing users with the ability to balance sound levels seamlessly.

Signal strength is another vital characteristic of the U-800, featuring a dynamic range that offers clear high frequencies and deep lows, contributing to an overall rich sound quality. The system also employs advanced companding technology, which reduces unwanted noise and enhances the clarity of the audio being transmitted.

The microphone itself is lightweight and ergonomically designed for comfortable use, making it suitable for long performances or presentations. Additionally, it features a cardioid pickup pattern that helps isolate the desired sound source while minimizing background noise. This is particularly beneficial in live settings where crowd noise or other distractions may be present.

Battery life is a crucial aspect of any wireless system, and the U-800 does not disappoint. With efficient power management, the system offers extended battery life, allowing users to perform longer without the worry of battery depletion. It is also designed for quick and easy setup, with an intuitive interface that makes it accessible even for those who may be new to wireless systems.

In summary, the Nady Systems U-800 combines professional audio quality with user-friendly features, making it a reliable choice for musicians, entertainers, and speakers. Its UHF operation, dual-channel capability, excellent sound quality, and long battery life position the U-800 as a leading solution in the realm of wireless microphone systems. Whether for stage performances or public speaking events, the U-800 ensures that every word and note is transmitted with clarity and precision.
Top Page Image Contents