Emerson HD1405 owner manual Check for possible leaks by performing the following

Page 6

SP6551 manual - 71238 7/12/05 1:56 PM Page 6

Water Fill (continued)

Open the pivoting lid of the humidifier. Remove the water bottles, by lifting them straight up and out of the cabinet.

Notice the water bottles are designed as right and left hand units. Position them in the cor- rect location so the humidifier can function properly. The water bottles should rest in the front of the cabinet. Each Side Fill Cap must be facing the rear of the unit

Each water bottle is designed with a Side Fill Cap that is easily removable. Remove the Side Fill Cap on the side of the water bottle by twisting counterclockwise. Each bottle will hold 2-3/8 gallons (9 litres) of water.

Place the opening of the water bottle under a water faucet (the bottle should fit under a four-inch clearance faucet). Fill with cold water. If necessary, add recommended amount of EPA registered liquid bacteriostat. Do not add solid debris as this could make the valve leak. Install the Side Fill Cap by twisting clockwise. Hand tighten only.

Check for possible leaks by performing the following:

1.Grasp bottle handle and hold the bottle upright over a sink.

2.Press up on valve cap plunger for about one second to let out a little water.

3.Release the plunger.

4.Listen for air bubbles. Look for leaks around Side Fill Cap.

5.If you hear air bubbles or see leaks, retighten Side Fill Cap and repeat

steps 1-4.

NOTE: Repeat for other bottle. If either fill cap leaks, water may overflow and leak out of the rear vents of the cabinet.

Wipe off excess water from the bottle. Position the water bottle back into the unit. Grasp the water bottle handle, and lower into the cabinet until the bottle sits on pads at bot- tom of cabinet. The Side Fill Cap must be facing the rear of the cabinet. When posi- tioned properly, the plunger will open and water will flow into the cabinet. The water level will automatically remain at approxi- mately 1/2" until the bottles are empty.

The unit is now ready for operation.

Rear of

Humidifier

Side Fill Cap” Should Always

Face Rear

Turn Counterclockwise

to Remove Cap

Valve

Cap Plunger

Pivoting Lid Removed

for Clarity

6

Image 6
Contents HD1405 Evaporative Console General Safety Instructions Know Your Humidifier Unpacking & Assembly Humidifier OperationsElectrical Hook-Up Location Instructions Water FillCheck for possible leaks by performing the following Operating Humidifier Controls To Operate the ControlsUsing Your Humidifier Operating Tips for Best PerformanceReplacement and Care of Filters Pivoting Lid Fan Assembly Filter Spring Housing TabsReplacement and Care of Filters Cleaning Your Humidifier Step To Remove PartsRemoving Scale Disinfecting Humidifier Cabinet and BottlesTroubleshooting Trouble Probable Cause RemedyRepair Parts Parts List for MoistAir Humidifier Model No. HD14050Parts Key DescriptionFor Technical HELP, Call

HD1405 specifications

The Emerson HD1405 is a pioneering solution in the realm of process automation, designed to enhance efficiency, reliability, and accuracy in industrial operations. As part of Emerson's advanced instrumentation portfolio, the HD1405 stands out for its blend of cutting-edge features and user-friendly design.

One of the HD1405’s main features is its robust data acquisition capabilities. It is equipped with high-speed processing power that allows for real-time monitoring and control of various processes. The device can capture and analyze data from multiple sources simultaneously, ensuring that operators have access to crucial information at their fingertips.

Another notable aspect of the HD1405 is its integration of advanced diagnostic tools. These tools leverage predictive analytics to anticipate potential equipment failures before they occur. This proactive approach helps to minimize downtime and enhances the overall reliability of the industrial processes being monitored. With features like self-diagnostics and trend analysis, the HD1405 empowers operators to make informed decisions based on comprehensive data insights.

The Emerson HD1405 also supports a wide array of communication protocols, providing seamless connectivity with existing systems. Its compatibility with various industry standards ensures that it can be easily integrated into any automation architecture, thus facilitating point-to-point communication as well as connection to larger networks.

In terms of user experience, the HD1405 features a highly intuitive interface. Operators can navigate through settings and data with ease, thanks to the device's clear graphical displays and logical layout. This user-centric design minimizes the learning curve for technicians and allows for efficient training and onboarding processes.

Additionally, the HD1405 is designed to endure harsh industrial environments. Its durable construction and rugged design enable it to withstand extreme temperatures, vibrations, and contaminants commonly found in process industries. This reliability in challenging conditions makes it an ideal choice for a wide range of applications, from oil and gas to chemical processing and beyond.

In summary, the Emerson HD1405 is a versatile and sophisticated device that combines advanced data acquisition capabilities, predictive diagnostics, multi-protocol connectivity, and user-friendly design. Its robust characteristics position it as an invaluable tool for optimizing industrial processes and fostering operational excellence. As industries continue to evolve, the HD1405 remains at the forefront of automation technology, helping businesses achieve their goals with efficiency and precision.