Local Computer Installation
The screws should be 3.25'' (82.5 mm) apart and lined up vertically.
3. Drill the marked locations with a 3/32'' or 7/64'' (2.2 to 2.7 mm) drill bit.
4. Drive the two #6 x 1'' (3.5 mm x 25 mm) pan head
5. Leave at least a 1/8'' (3 mm) space between the wall and the heads of the screws.
3.25"
(82.55mm)
Drill 3/32"
or 7/64"
(~2.2 to 2.7mm) Holes
Template to Scale
6. Slide the keyholes on the back of the case over the two screw heads.
#6 X 1"
Screws
Local Computer Installation
The instructions below contain the base procedures for connecting and setting up a local or remote connection between your Weather Envoy and a computer. Additional setup not featured in this manual is required for all Weather Envoy,
7