SPECIFIC SAFETY RULES
1.Maintain labels and nameplates on the Ultrasonic Cleaner. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.Always wear ANSI approved safety impact eye goggles when using the Ultrasonic Cleaner. Use a full face shield to protect against chemical splashing. Using personal safety devices reduces the risk of injury.
3.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location.
4.Never leave the Ultrasonic Cleaner unattended when it is plugged into an electrical outlet. Turn off the unit, and unplug it from its electrical outlet before leaving.
5.Never use volatile solvent to clean objects in the Ultrasonic Cleaner. Never use gasoline or other flammable liquids.
6.Never immerse the Ultrasonic Cleaner in liquid. Do not place or store the Ultrasonic Cleaner where it can fall or be pulled into a tub, sink, or other free standing pool of water.
7.Do not immerse
8.Do not use for medical purposes or sanitizing.
9.Do not use penetrating oils in the Cleaner as they may damage the Cleaner and any materials being cleaned.
10.Do not overfill or underfill the Cleaner. Fill water only to the MAX line when filling the tank. Never operate the cleaner unless the water level is above the MIN mark.
11.Do not clean multiple objects at a time. Using many objects in the tank at one time will cause them to bang against one another, damaging both objects being cleaned in the tank.
12.Use only lukewarm water. Excessively hot water will damage the unit.
13.Warning: Do not immerse fingers or any body part in the tub during operation.
14.Never use a cleaning agent that could create bubbles or suds that can accumulate and go up and over the edge of the cleaning tank.
15.People with pacemakers should consult their physician(s) before using this prod- uct. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.
SKU 93035 | For technical questions, please call | Page 5 |