Inserting Humidifier Filter

7.The Power Light will turn on red. In a few seconds it will switch to green, indicating that enough water is in the water basin, and mist will start emitting through the openings at water tank lid.

8.Use the humidity output regulator control knob to adjust the intensity of the mist output. Turning the knob clockwise will increase the moisture output, turning the knob counterclockwise will reduce the moisture output.

(see Fig. 10)

Note: When at maximum level it is normal to hear a faint dripping sound.

Fig. 10

9.When the humidifier runs out of water the power light will turn red, and the mist output will stop. This is a safety feature to prevent the humidifier from possibly over heating and damaging the nebulizer. This safety feature uses a water level sensor to stop the nebulizer once the water level sinks below the required level in the water basin. Turn the humidifier off and unplug before removing and refilling the water tank. Please note that the power light on the humidifier body will stay on.

The (red) light signal indicates that the humidifier is turned on and needs to be refilled.

(SOLD SEPARATELY not included with your humidifier)

A humidifier filter is an optional accessory for your Crane Cool Mist Humidifier. Filters are used to eliminate white dust caused by hard water and to reduce mold spores and bacteria that can build up in your humidifier.

Place humidifier filter in humidifier as shown in Fig. 10A

NOTE: Do not leave filter in humidifier longer than recommended time. See filter instructions on filter box packaging.

Filters are not included with the humidifier and can be purchased separately.

Fig. 10 A

SET THE CORRECT HUMIDITY OUTPUT

Adjust the mist control so that the mist rises up and gets absorbed by the room air. Do not turn on too high an output as the mist cannot be absorbed by the air and accumulates on the surface around the humidifier.

If the humidifier is placed near a fan or air conditioning outlet the mist may be forced down by the foreign air stream.

Change the location of the humidifier or reduce the output of the other room conditioning appliances.

correct

wrong

EE-3184-4138 specifications

The Crane EE-3184-4138 is an advanced electronic equipment solution designed for industrial automation and control applications. Known for its combination of reliability and cutting-edge technology, this device caters to a wide array of sectors, including manufacturing, energy, and transportation.

One of the standout features of the Crane EE-3184-4138 is its robust data acquisition capabilities. Equipped with high-precision sensors, it can monitor various parameters such as temperature, pressure, flow, and level with remarkable accuracy. This feature is especially crucial in environments where operational efficiency and safety are paramount.

The device utilizes state-of-the-art communication technologies, ensuring seamless integration with existing systems. It supports multiple communication protocols, including Modbus, Ethernet/IP, and Profibus, making it versatile for different industrial settings. This flexibility allows for easy data sharing and remote monitoring, ultimately improving operational transparency.

Another notable characteristic of the Crane EE-3184-4138 is its impressive scalability. Users can configure the device to suit their specific needs, whether it’s a small-scale operation or a large, complex facility. This adaptability is crucial in today’s fast-paced industrial landscape, where quick adjustments can lead to significant cost savings and improved performance.

In terms of user interface, the device features an intuitive design that simplifies operation and monitoring. With a clear display and user-friendly controls, operators can easily access critical information and make informed decisions on the fly. This emphasis on usability reduces the learning curve, allowing teams to focus on their core tasks without being hindered by complicated technology.

Furthermore, the Crane EE-3184-4138 is built to withstand challenging environments. Its rugged design ensures durability, even in harsh conditions, thus minimizing downtime and maintenance costs. This reliability is essential for industries where equipment failure can lead to severe operational disruptions.

In conclusion, the Crane EE-3184-4138 stands out as a powerful tool in the realm of industrial automation. With its advanced features, reliable performance, and flexible technology, it serves as an indispensable asset for organizations seeking to enhance productivity and efficiency in their operations. Its thoughtful design and comprehensive capabilities make it a leading choice among industrial solutions.