made, the display will return to show the current room humidity.
5.To stop the unit, press and hold the button for two seconds, or keep pressing the button until the display reads OF.
HUMIDISTAT INSTRUCTIONS
To take advantage of the Digital Humidistat, press the MODE button until the speed is set in either the Auto HIGH (A3), Auto MEDIUM (A2) or Auto LOW (A1) setting. Then adjust the set humidity by using the up and down buttons. Humidity will increase in increments
of 5%. When the humidity level is set, the display will return to show the current room humidity. When the room humidity level rises above the set humidity, the humidifier will stop. When the humidity level drops below the set humidity, the humidifier will turn on automatically.
NOTE: Allow up to 30 minutes for the filter to fully absorb water and for the unit to produce moisture.
NOTE: The Digital Humidistat Humidifier has memory. This means that when you turn the unit back on, it will be at the last setting the humidifier was set at.
If you do not plan to use the humidifier for two or more days, make sure any residual water is drained from the water reservoir, base and wick filters to prevent algae or bacteria growth.
USING THE PROGRAMMABLE TIMER
The Digital Humidistat allows the user to program the humidifier to come on at a preset time, or turn off after a set amount of time.
Setting the Off Timer:
1.Select the Mode and or humidity you wish the humidifier to run in.
2.While the humidifier is running, press and hold the up and down buttons simultaneously for 2 seconds. The display will flash “00”.
3.By pressing the up and down buttons, program the humidifier to turn off up to 16 hours later in increments of 1 hour.
4.After setting the timer, the display will return to show the current room temperature. The Timer light will illuminate to show that the timer is activated.
5.After the predetermined length of time has passed, the humidifier will automatically shut off.
Setting the On Timer:
1.While the humidifier is off, press and hold the up and down buttons simultaneously for 2 seconds.
2.By pressing the up and down buttons, program the humidifier to turn on up to 16 hours in advance in increments of 1 hour.
3.The humidifier will continue to run on Auto Mode (HI) at 45% until the user shuts it off.
REMOTE INSTRUCTIONS
1.Insert 2 AAA batteries into back of remote control.
2.Press the Mode button on remote to begin operation.
3.Use the remote to control the same features as the base unit.
NOTE: The timer function can only be activated on the base unit. It cannot be activated via the remote control.
NOTE: The remote will not shut off the humidifier by holding the remote button for 2 seconds. The user needs to scroll to “OF” to shut off the humidifier with the remote control.
NOTE: Do not mix new and old batteries. Do not mix alkaline, standard
Replacing the Wick
Through normal use, waterborne minerals and sediment become trapped in the wick filter. The harder your water, the greater amount of minerals in the water, and the more often you will need to change your wick filter. Using the Filter Monitor located on the top grill, you will be able to check the life of the wick filter in your humidifier. When the unit is turned off the Filter Monitor needle will read “change”. After the needle reads change for 60 minutes, the filter replacement is recommended. Regular filter replacement is necessary to ensure optimal humidifier performance.
5 | 6 |