HOW to Install this Smoke Alarm

THE PARTS OF THIS SMOKE ALARM

1. Test/Silence button

2. Swing-open battery drawer

3. Red Light

1. Mounting bracket

2. Horizontal mounting slot (1 of 2)

3. Vertical

mounting slot (2 of 2)

4. Swing-open battery drawer

5. Turn this way to remove from bracket

6. Turn this way to attach to bracket

TOOLS YOU WILL NEED:

This unit is designed to be mounted

on the ceiling, or on the wall if necessary.

•Pencil

•Drill with 3/16” (5 mm) drill bit

•Standard flathead screwdriver

•Hammer

•Pliers or utility knife, to activate optional “tamper-resistant” locking features

FOLLOW THESE SIMPLE STEPS!

Do not install this Smoke Alarm in a location where it could be easily triggered when using your remote to operate your TV, VCR, or other remote controlled appliances.

If you want to lock the battery drawer, or lock the Smoke Alarm to the mounting bracket, please read the “Optional Locking Features” section before you begin installation.

1.Hold base firmly and twist the mounting bracket clockwise to sepa- rate it from the base.

2.Hold the mounting bracket against the ceiling (or wall) so the vertical mounting slot is aligned in the 12 o’clock position and trace around the inside of the mounting slots (vertical and horizontal mounting).

3.Put the unit where it won’t get covered with dust when you drill the mounting holes.

4.Using a 3/16” (5 mm) drill bit, drill a hole through the center of the oval outlines you traced.

5.Insert the plastic screw anchors (in the plastic bag with screws) into the holes. Tap the screw anchors gently with a hammer, if necessary, until they are flush with the ceiling or wall.

6.Attach the mounting bracket to the ceiling or wall.

7.Install the battery (included) so the terminals on the battery match the terminals on the Smoke Alarm. Match “+” to “+” and “-” to “-.” Push the battery in until it snaps in securely and cannot be shaken loose. If the battery is not snapped in completely, the unit cannot receive battery power.

NOTE: After you install the battery, the power indicator light will flash and the horn will chirp. (If the unit alarms, the light will blink rapidly, and the horn will repeatedly sound 3 beeps, pause, 3 beeps.)

8.Attach the Smoke Alarm to the bracket. Line up the guides on the alarm’s base with the guides on the mounting bracket. When guides are lined up, turn the base clockwise (right) until it snaps into place.

NOTE: Once the Smoke Alarm is snapped onto the bracket, you can rotate the cover to adjust the alignment.

9.Test the Smoke Alarm. See “Weekly Testing.”

OPTIONAL LOCKING FEATURES

The locking features are designed to discourage unauthorized removal of the battery or Alarm. It is not necessary to activate the locks in single-family households where unauthorized battery or Alarm removal is not a concern.

These Smoke Alarms have two separate locking features: one to lock the battery compartment, and the other to lock the Smoke Alarm to the mounting bracket. You can choose to use either feature independently, or use them both.

Tools you will need: • Needle-nose pliers or utility knife • Standard Flathead screwdriver.

Both locking features use locking pins, which are molded into the mounting bracket. Depending on which locking features you use, remove one or both pins from the mounting bracket using needle nose pliers or a utility knife.

To permanently remove either lock, insert a flathead screwdriver between the locking pin and the lock, and pry the pin out of the lock.

SA302 specifications

The First Alert SA302 is an innovative smoke and carbon monoxide detector designed to enhance home safety through cutting-edge technology and user-friendly features. As a dual-sensor alarm, it combines both photoelectric and ionization sensors, effectively detecting a wide range of fire types, from smoldering fires to fast-flaming blazes. This comprehensive detection capability ensures a quicker response to potential dangers, significantly increasing chances for safe evacuation in case of a fire.

One of the standout features of the SA302 is the voice alarm system, which provides clear spoken alerts for smoke and carbon monoxide threats. This unique feature helps differentiate between the types of hazards, giving users essential information during emergencies. Additionally, the unit is equipped with a loud 85-decibel alarm that can be heard throughout the home, ensuring occupants are alerted no matter where they are.

The device also includes a multi-functional digital display that shows current levels of carbon monoxide, enhancing user awareness of air quality. This real-time information coupled with a low-level CO detection is vital for maintaining a safe living environment, as it can detect potentially dangerous levels before symptoms arise.

Installation of the First Alert SA302 is straightforward, thanks to its battery-operated design. It provides the flexibility to place it in any room without the necessity for hard-wiring or electrical outlets. The detector comes with a battery backup, ensuring optimal function even in power outages, a critical consideration during emergencies.

Regular maintenance is simplified with the SA302, as it is designed with a convenient test/silence button that allows users to easily check the functionality of the device and silence false alarms caused by cooking or other household activities. The unit also features an easy-to-read expiration indicator, which alerts users when it is time to replace the alarm, ensuring that safety measures remain up-to-date.

In conclusion, the First Alert SA302 is a robust smoke and carbon monoxide detector that offers enhanced safety features, dual-sensor technology, and user-friendly innovations. Its ability to tackle multiple threats, combined with effective alerts and easy maintenance, positions it as a vital component in protecting homes and saving lives.