First Alert SA100B, 100S If YOU Suspect a Problem, Limited Warranty, What to do in Case of Fire

Page 4

RESPONDING TO AN ALARM, Continued

Never disconnect the AC power to quiet an unwanted alarm. Disconnecting the power disables the alarm so it cannot sense smoke. This will remove your protection. Instead open a window or fan the smoke away from the unit. The alarm will reset automatically

ELECTRICAL SHOCK HAZARD: Attempting to disconnect the power connector from the unit when the power is on may result in electrical shock, serious injury or death.

When an interconnected system of AC powered units is in alarm, the alarm indicator light on the unit(s) that triggered the alarm will blink rapidly. It will remain OFF on any remaining units.

If the unit alarms and you are not absolutely certain of the source of the smoke, get everyone out of the house immediately. Stay calm and follow your family escape plan. Stay as low to the ground as possible, and cover your mouth with a damp cloth. Never open a door before testing it to see if it is hot. Call the Fire Department from outside, and give them your address then name. Read “What To Do In Case Of Fire” for more information.

If the unit alarms and you are certain that the source of smoke is not a fire—cooking smoke or an extremely dusty furnace, for example—open a nearby window or door and fan the smoke away from the unit. This will silence the alarm, and once the smoke clears the unit will reset automatically.

WHAT TO DO IN CASE OF FIRE

Don’t panic, stay calm. Follow your family escape plan.

Get out of the house as quickly as possible. Don’t stop to get dressed or collect anything.

Feel doors with the back of your hand before opening them.

If a door is cool, open it slowly. Don’t open a hot door. Keep doors and windows closed, unless you must escape through them.

Cover your nose and mouth with a cloth (preferably wet). Take short, shallow breaths.

Meet at your planned meeting place outside your home, and do a head count to make sure everybody got out safely.

Call the Fire Department as soon as possible from outside. Give your address, then your name.

Never go back inside a burning building for any reason.

Contact your Fire Department for ideas on making your home safer.

Alarms have various limitations. See "Limitations of Smoke Alarms" for details.

IF YOU SUSPECT A PROBLEM

Smoke Alarms may not operate properly because of a build-up of dirt, dust or grease on the Smoke Alarm cover, or installation in an improper location. Alarms with battery back-up may not work because of dead, missing or weak batteries. Clean the Smoke Alarm as described in “Regular Maintenance”—and install a fresh battery if unit has battery back-up—then test the Smoke Alarm again. If it fails to test properly when you use the test button, or if the problem persists, replace the Smoke Alarm immediately.

If you experience frequent non-emergency alarms (like those caused by cooking smoke), try relocating the Smoke Alarm.

If the alarm sounds when no smoke is visible, try cleaning or relocating the Smoke Alarm. The cover may be dirty.

If the alarm does not sound during testing, make sure it is receiving AC power from the household current.

If the strobe light lens is loose or broken, the entire unit should be replaced immediately. Never remove the strobe light lens for any reason. Doing so can permanently damage the unit and will void your warranty.

Always discharge the branch circuit before servicing an AC or AC/DC Smoke Alarm. First, turn off the AC power at the circuit breaker or fuse box. Next, remove the battery from Smoke Alarms with battery back-up. Finally, press and hold the test button for 5-10 seconds to discharge the branch circuit.

Do not try fixing the alarm yourself – this will void your warranty!

If the Smoke Alarm is still not operating properly, and it is still under warranty, please see “How to Obtain Warranty Service” in the Limited Warranty below.

LIMITED WARRANTY

BRK Brands, Inc., ("BRK") the maker of BRK® brand and First Alert® brand products, warrants that for a period of ten years from the date of purchase, this product will be free from defects in material and workmanship. BRK, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. BRK dealers, service centers, or retail stores selling BRK products do not have the right to alter, modify or any way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than BRK or an authorized service center. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and tornadoes or any batteries that are included with this unit.

BRK shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. Some states, provinces or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or province to province.

How to Obtain Warranty Service

Service: If service is required, do not return the product to your retailer. In order to obtain warranty service, contact the Consumer Affairs Division at 1-800-323-9005, 7:30 AM - 5:00 PM Central Standard Time, Monday through Friday. To assist us in serving you, please have the model number and date of purchase available when calling.

For Warranty Service return to:

BRK Brands, Inc., 25 Spur Drive, El Paso, TX 79906

RECOMMENDED PLACEMENT FOR HEARING IMPAIRED SMOKE ALARMS WITH INTEGRATED STROBE LIGHT

Smoke Alarms with Integrated Strobe lights intended for the hearing impaired should be located in the bedroom where a hearing impaired person sleeps. Additional alarms should be located in any room where a hearing impaired person may be present and need to be notified of a smoke danger.

According to NFPA 72, for wall mounting, a 177 candela strobe light must be used in a sleeping area when mounting height of lens is less than 24 inches (61 cm) from the ceiling. A Smoke Alarm with an integrated Strobe light must be placed in accordance with the Smoke Alarm placement recommendations.

For Wall Mounting the alarm should be between 4 inches and 12 inches (102 mm and 305 mm) from ceiling to avoid the "dead air space". For Ceiling Mounting the alarm should be placed at least 4 inches (102 mm) from wall or corner (see "Locations to Avoid for Smoke Alarms" below). In addition, for wall or ceiling mounting, the unit must be located within 16 linear feet (4.8 meters) from top of lens to the pillow (See diagram).

RECOMMENDED PLACEMENT

4

Image 4
Contents Table of Contents Fire Safety TipsBefore YOU Install this Smoke Alarm USER’S ManualHOW to Install this Smoke Alarm Parts of this Smoke AlarmFollow These Installation Steps STAND-ALONE Alarm onlyIf this Smoke Alarm Sounds Weekly TestingRegular Maintenance Responding to AN AlarmIf YOU Suspect a Problem Limited WarrantyResponding to AN Alarm Recommended PlacementLocations to Avoid for Smoke Alarms Installing Smoke Alarms in Mobile HomesAgency Placement Recommendations Strobe Light Output for Wall & Ceiling MountingAbout Smoke Alarms Limitations of Smoke AlarmsSpecial Compliance Considerations However, they do not provide interconnected functionality

100S, SA100B specifications

The First Alert 100S and SA100B smoke alarms are integral components of modern home safety systems, designed to keep families safe from the dangers of fire. Both models boast a range of advanced features that enhance their performance and reliability in detecting smoke and alerting occupants.

One of the standout characteristics of the First Alert 100S is its ionization sensing technology. This technology is particularly effective at detecting fast-flaming fires, which can arise from burning paper, wood, and other common household materials. Ionization smoke alarms work by using a small amount of radioactive material to ionize air in the sensing chamber, creating a current. When smoke enters the chamber, it disrupts this current, triggering the alarm. This feature makes the 100S an ideal choice for those seeking prompt response to sudden fire outbreaks.

On the other hand, the SA100B employs a photoelectric sensing technology. Unlike ionization alarms, photoelectric models are adept at detecting smoldering fires that produce larger smoke particles. By utilizing a light source and a light sensor, the SA100B can sense when smoke enters the light beam, activating the alarm. This dual-sensing capability in some models helps to ensure optimal detection of various fire types, reducing the risk of false alarms while maximizing safety.

Both models come with several user-friendly features designed to enhance usability. They include a loud 85-decibel alarm to ensure that the sound penetrates through the ambient noise in a household, alerting everyone to the danger present. Additionally, the battery backup ensures continuous operation during power outages, which is crucial in emergencies.

Installation and maintenance are also simplified in these devices. The First Alert models are typically easy to mount on ceilings or walls, and most models feature a test button, allowing users to quickly verify that the alarm is functioning correctly. The low battery indicator signals when it's time to replace the battery, further decreasing the risk of device failure.

In conclusion, the First Alert 100S and SA100B smoke alarms are dependable choice for fire safety, combining advanced technologies with user-friendly features. Their specific sensing capabilities ensure they provide comprehensive protection against different types of fires, making them essential for every household's safety plan.