Mobile Homes, Mounting | Kidde 0976CA specs

Installation

Mobile Homes

Modern mobile homes have been designed and built to be energy efficient. Install smoke alarms as recommended in Recommended Locations and Image 2A.

In mobile homes that are not well insulated compared to present standards, extreme heat or cold can be transferred from the outside to the inside through poorly insulated walls and roof. This may create a thermal barrier that can prevent the smoke from reaching an alarm mounted on the ceiling. In such units, install the smoke alarm on an inside wall with the top edge of the alarm at a minimum of 10 cm (4") and a maximum of 30.5 cm (12") below the ceiling (Image 2A).

If you are not sure about the insulation in your mobile home, or if you notice that the outer walls and ceiling are either hot or cold, install the alarm on an inside wall. For minimum protection, install at least one alarm close to the bedrooms. For additional protection, see Image 1A.

WARNING: Test your smoke alarm operation after R.V. or mobile home vehicle has been in storage, before each trip and at least once a week during use.

Mounting

CAUTION: This unit is sealed. The cover is not removable!

CAUTION: When wall mounting, the unit must be mounted so that battery door faces down! (Image 3C) Incorrect orientation of wall mounted smoke alarms will decrease operational effectiveness.

•After selecting the proper smoke alarm location as described previously, hold the mounting plate against the selected installation location (wall or ceiling) and mark the center of the holes with a pencil. To ensure aesthetic alignment of the alarm with the hall-way, or wall, the “A” line on the mounting plate should be parallel with the hallway when ceiling mounted, or horizontal when wall mounted (Image 3A and 3B). Drill a hole through the pencil marks and use the enclosed screws and anchors to secure. Use 3/16” drill for anchor holes. Align the alarm with the mounting plate and rotate clockwise (right) until the unit is aligned.

0976CA specifications

Kidde 0976CA is a robust and versatile smoke alarm designed to enhance home safety through advanced technology and user-friendly features. This unit is engineered to provide reliable smoke detection, helping to protect families from potential fire hazards.

One of the standout features of the Kidde 0976CA is its dual-sensor technology. This model incorporates both photoelectric and ionization sensors, offering comprehensive detection capabilities. The photoelectric sensor is excellent for detecting smoldering fires, which often produce more smoke than flames. In contrast, the ionization sensor is effective for detecting fast-flaming fires. This combination ensures that the device can promptly respond to a wide range of fire scenarios.

Moreover, the Kidde 0976CA is equipped with a large, easy-to-read digital display that provides real-time information regarding the status of the smoke alarm. This feature not only indicates when the device is active but also alerts users to any detected smoke, sound, or error conditions. The display also shows the battery status, ensuring that users are always aware if maintenance is required.

Battery backup is another critical characteristic of the Kidde 0976CA. In the event of a power outage, this smoke alarm will continue to function, providing peace of mind during emergencies. Its easy-to-replace battery design ensures that routine maintenance can be performed without hassle.

In terms of installation, the Kidde 0976CA is designed for convenience. The alarm is lightweight and can be mounted on walls or ceilings with minimal effort. The user manual includes step-by-step instructions that make it accessible even for those with limited DIY experience.

Safety is further enhanced by the LED indicator lights, which serve to visually alert occupants when smoke is detected or if the device requires maintenance. Additionally, the Kidde 0976CA comes with a test button that allows users to easily check the alarm’s functionality, ensuring that it is always in working order.

The Kidde 0976CA is a reliable smoke alarm that combines advanced detection technology with user-friendly features, making it an essential addition to any home’s safety system. Its dual-sensor capabilities, digital display, battery backup, and easy installation reflect Kidde's commitment to providing effective fire safety solutions. With this smoke alarm, homeowners can feel more secure knowing they have taken proactive measures to protect their loved ones and property from fire dangers.