Elation Professional 1200C manual Understanding DMX

Page 18

Design Beam 1200C™

8. UNDERSTANDING DMX

DMX-512:DMX is short for Digital Multiplex. This is a universal protocol used by lighting and controller manufactures as a form of communication between intelligent fixtures and controllers. DMX allows all makes and models of different manufactures to be linked together and operate from a single controller. This is possible as long as all the fixtures and the controller are DMX compliant. A DMX controller sends the DMX data instructions to the fixture allowing the user to control the different aspects of an intelligent light. DMX data is sent out as serial data that travels from fixture to fixture via data “IN” and data “OUT” 3-Pin or 5-Pin XLR connectors located on the fixtures (most controllers will only have output jacks).

DMX Linking: To ensure proper DMX data transmission, always use proper DMX cables and a terminator. When using several DMX fixtures try to use the shortest cable path possible. The order in which the fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be placed anywhere in the DMX chain, at the beginning, at the end, or anywhere in the middle. The DMX controller knows to send data assigned to address 1 to that fixture no matter where it is located in the DMX chain. The Design Beam 1200C™ is a 21-channel DMX fixture (16-bit mode). The DMX address is set electronically using the controls on the LCD menu.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave Operation): Never split a DMX line with a “Y” style connector. Your fixture and your DMX controller require a standard 3-pin or 5-pin XLR connector for data input and data output (the figure on the next page is of a 3-Pin XLR connector). If you are making your own cables, be sure to use two conductor shielded digital DMX cable rated at 120 ohms, this cable is specifically designed for DMX transmission and may be purchased from your Elation dealer or at most professional lighting retailers. Your cables should be made with a male and female XLR connector on either end of the cable. Also, remember that a DMX line must be daisy chained and cannot be split, unless using an approved DMX splitter such as the Elation Opto Branch 4™ or DMX Branch/4™.

Note: Although microphone and DMX cables may look similar, they are not constructed of the same material and should never be used in place of each other.

©Elation Professional®

18

Design Beam 1200C™

Page 17 Page 19
Image 18
Page 17 Page 19
Contents REV /30/2008-VISAGE Design Beam 1200C Elation Professional Contents General Information Design Beam 1200C Never open this fixture while in use Safety Instructions Design Beam 1200C Features General Guidelines Fixture Overview 12 13 14 15 16Lamp Installation Instructions Safety RegulationsInstallation Procedure Lamp Optimization Design Beam 1200C Mounting and Installation MountingMounting points Clamp Mounting Securing the Design Beam 1200CUnderstanding DMX DMX-512 control connection DMX-512 connection with DMX terminator Fixture DMX addressingDesign Beam 1200C Fixture Menu PAN…Lamp is struck when Fixture is powered PAN Auto Program Internal Programs Set To Slave Slave settingMenu Functions Music control Run Internal Programs to SoundTotal Life Hours Timer PasswordTime information Current time Last Run HoursProduct Info Clear Lamp TimeTemp. Info Lamp on/offStatus setting Design Beam 1200C Wireless DMX Initial effectEffect Adjust Edit Program DMX Addressing Controller Settings Operation Design Beam 1200C Working with the Wireless DMX Wdmx System Setting up the Wdmx systemWdmx Indicators Clearing Transmitter LinkWorking with BUILT-IN Programs Memory StatisticsBuilding Scenes Building Scenes from an External DMX Controller Editing Programs Playing a ProgramDesign Beam 1200C Design Beam 1200C Design Beam 1200C DMX Channel Traits Tilt Movement 8bit PAN Movement 8bitPan Fine 16bit Tilt Fine 16bitCyan Color Fine Color Wheel FineCyan Color Magenta ColorRotating Effect index, rotating Effect rotation Fixed GobosFixed gobo indexing Fine Rotating Effect indexing FineFrost Dimmer intensityFine Dimmer intensity Frost FineLamp on/off, reset, internal programs Fuse Replacement Error Codes Pan ErTilt Er Gobo 2 Er Gobo 1 ErGobo rotation 1 Er Cyan Color ErFocus Er CTO color ErColor wheel Er Effect Wheel ErCleaning and Maintenance Year Limited Warranty Design Beam 1200C Photometric Data Dimensional Drawings Circuit Schematic Technical Specifications Power supply Power consumptionDesign Beam 1200C Design Beam 1200C Elation Professional Elation Professional
Related manuals
Manual 3 pages 51.77 Kb

1200C specifications

The Elation Professional 1200C is a powerful moving head fixture that has carved a niche for itself in the world of professional lighting design. Known for its robust features and advanced technologies, it is well-suited for a variety of applications, including concerts, theatrical productions, and large-scale events.

At the core of the 1200C is its impressive 1200-watt LED engine, which delivers an exceptional brightness of up to 44,000 lumens. This powerful output makes it ideal for large venues, ensuring that lighting effects are visible even in well-lit environments. The fixture features a compact and lightweight design, allowing for easy transportation and installation.

One of the key characteristics of the 1200C is its versatile color mixing capabilities. With a wide color palette provided by its CMY color mixing system and additional fixed colors, users can achieve a spectrum of vibrant hues to enhance any performance. The inclusion of a linear color temperature adjustment allows lighting designers to seamlessly switch between warm and cool tones, ensuring the perfect ambiance for every occasion.

Additionally, the 1200C offers advanced gobo functionality, including a rotating gobo wheel with several interchangeable gobos. This feature allows designers to project intricate patterns and shapes onto surfaces, adding depth and visual interest to any event. The fixture also comes equipped with a prism wheel, which can create stunning effects by splitting beams and generating multiple images.

For dynamic movement, the Elation 1200C utilizes a fast and precise pan and tilt system, boasting an impressive range of motion that enables sweeping movements and sharp angles. With a full 540 degrees of pan and 270 degrees of tilt, the fixture can easily cover large areas and adapt to various staging setups.

In terms of control, the 1200C is compatible with both DMX and RDM protocols, providing flexibility for integration into any lighting rig. Its intuitive OLED display makes it easy for operators to navigate settings and monitor performance.

Overall, the Elation Professional 1200C stands out for its combination of power, versatility, and user-friendly features, making it an essential tool for lighting professionals looking to elevate their productions. Whether it’s for a concert stage, corporate event, or theatrical performance, the 1200C delivers stunning visual effects and reliable performance, ensuring impactful lighting that captivates audiences.
Top Page Image Contents