BRK electronic 3001, 2002 user manual If this Smoke Alarm Goes Into Alarm, Year Limited Warranty

Page 5

IF THIS SMOKE ALARM GOES INTO ALARM

WARNING!

If the unit alarms and you are not testing it, it is warning you of a potentially dangerous situation that requires your immediate attention. NEVER ignore any alarm. Ignoring the alarm may result in injury or death. If the unit alarms and you are not absolutely certain of the source of the smoke, get everyone out of the house immediately.

Never remove the batteries from a battery operated smoke alarm to stop an unwanted alarm (caused by cooking smoke, etc.). Removing the batteries disables the alarm so it cannot sense smoke, and removes your protection. Instead, open a window or fan the smoke away from the unit. The alarm will reset automatically.

Responding To An Alarm

During an alarm, you will hear a loud, repeating horn pattern: 3 beeps, pause, 3 beeps, pause.

If the unit alarms and you are not absolutely certain of the source of the smoke, get everyone out of the house immediately. Stay calm and follow your family escape plan. Stay as low to the ground as possible, and cover your mouth with a damp cloth. Never open a door before testing to see if it is hot. Call the Fire Department from outside, and give them your address then name. Read “What To Do In Case Of Fire” for more information.

If the unit alarms and you are certain that the source of smoke is not a fire—cooking smoke or an extremely dusty furnace, for example—open a nearby window or door and fan the smoke away from the unit. This will silence the alarm, and once the smoke clears the unit will reset automatically.

10-YEAR LIMITED WARRANTY

Coverage: BRK Brands, Inc. warrants its enclosed smoke alarm to be free from defects in materials and workmanship under normal use for a period of ten years from the date of purchase. During the first year after the date of purchase, BRK Brands, Inc. will replace any defective smoke alarm without charge. During the next nine years, BRK Brands, Inc. will replace any defective smoke alarm at a charge to you not to exceed BRK Brands, Inc.’s cost. This is your exclusive warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. Dealers, service centers, or retail stores selling this product do not have the right to alter, modify or any way change the terms and conditions of this warranty. In new construction, if your smoke alarms were installed by a contractor, this warranty is valid for the homeowner at the time of installation from the date of original installation and is not transferable.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage, current or battery, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than BRK Brands, Inc. Further, the warranty does not cover acts of God, such as fire, flood, hurricanes and tornadoes.

BRK Brands, Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in duration for 10 years. Some states, provinces, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state, or province to province.

Service: Units under warranty and in need of repair should be returned, shipping prepaid, to BRK Brands, Inc., Attn.: Consumer Affairs, 3920 Enterprise Court, Aurora, IL 60504-8132.

Warranty: BRK Brands, Inc. makes no warranty, express or implied, written or oral, including that of merchantability or fitness for any particular purpose, with respect to the battery.

IF YOUR SMOKE ALARM IS NOT WORKING PROPERLY

IMPORTANT!

Smoke alarms may not operate properly because of dead, missing or weak batteries, a build-up of dirt, dust or grease on the smoke alarm cover, or installation in an improper location. Clean the smoke alarm as described in “Regular Maintenance,” and install a fresh battery, then test the smoke alarm again. If it fails to test properly when you use the test button, or if the problem persists, replace the smoke alarm immediately.

Problem...

You should...

 

 

Smoke alarm alarms when

• Clean the smoke alarm. (See “Regular Maintenance.”)

no smoke is visible.

• Check the location of the smoke alarm.

 

(See “Where To Install Smoke Alarms.”)

 

 

You experience frequent unwanted alarms

• Check the location of the smoke alarm.

(like in response to cooking smoke).

(See “Where To Install Smoke Alarms.”)

 

 

Smoke alarm “chirps” intermittently.

• Check that the battery is installed correctly and is

 

working properly. (See “How to Install This Smoke

 

Alarm” and “Weekly Testing.”)

 

• Check the location of the smoke alarm.

 

(See “Where To Install Smoke Alarms.”)

 

• Clean the smoke alarm. (See “Regular Maintenance.”)

 

 

Smoke alarm “chirps” about once a minute.

• Replace the battery. (See “Regular Maintenance.”)

 

 

Alarm horn doesn’t sound during testing.

• Check that the battery is installed correctly and is

 

working properly. (See “How to Install This Smoke

 

Alarm” and “Weekly Testing.”)

 

 

If the smoke alarm is still not operating properly, and it is still under warranty, send it, shipping prepaid to:

BRK Brands, Inc., Attn.: Consumer Affairs, 3920 Enterprise Court, Aurora, IL 60504-8132. Enclose a note in the package describing what is wrong with the unit.

WARNING!

Do not try to fix the unit yourself—this will void your warranty!

BRK Electronics® is a registered trademark of BRK Brands, Inc.

5

Image 5
Contents Limitations of Smoke Alarms Other Features of Smoke AlarmsInside this Manual Special Compliance ConsiderationsWhere not to Install Smoke Alarms Where to Install Smoke AlarmsNfpa Standard 72 Section California State Fire MarshallIMPORTANT! Read Before Installing Smoke Alarm HOW to Install this Smoke AlarmProtecting Your Family from Fire What to do in Case of FireRegular Maintenance Weekly TestingYear Limited Warranty If this Smoke Alarm Goes Into AlarmIf Your Smoke Alarm is not Working Properly Responding To An Alarm

3001, 2002 specifications

BRK Electronics, a well-known name in the field of smoke alarms, carbon monoxide detectors, and home safety products, introduced the models 2002 and 3001, which have set new standards in fire safety technology. These models are designed to provide advanced protection for homes and commercial spaces, combining critical safety features with user-friendly operation.

The BRK 2002 model is primarily recognized for its reliable smoke detection capabilities. It is equipped with a photoelectric sensor, which is highly effective in identifying smoldering fires that produce a lot of smoke but little flame. This technology minimizes false alarms triggered by cooking smoke or steam, providing users with a more accurate and dependable warning system. The 2002 model features a sleek, low-profile design, making it suitable for various home aesthetics. Additionally, it comes with a hush feature, allowing users to silence the alarm temporarily during non-threatening situations.

In contrast, the BRK 3001 model incorporates both smoke and carbon monoxide detection capabilities, making it a dual-purpose unit for comprehensive safety. This model employs both photoelectric and ionization sensors, which together enhance its ability to detect a broader range of fire types. The carbon monoxide detection feature is particularly essential, as CO is a silent yet deadly gas that can accumulate from malfunctioning appliances or car exhaust. The 3001 model is designed to be interconnected with other alarms, providing a cohesive safety system throughout the home.

Another standout feature of both models is their battery backup systems, ensuring functionality even during power outages. Both alarms emit a distinct chirping sound when the battery is low, prompting users to replace it in a timely manner. The installation process for both models is straightforward, typically requiring a standard mounting bracket and basic tools.

In summary, BRK Electronics 2002 and 3001 models exemplify the fusion of advanced technology and user protection. Their respective features provide peace of mind for users, safeguarding against the threats of smoke and carbon monoxide. With their reliability, ease of use, and critical safety functions, these smoke and CO detectors represent a significant advancement in home safety solutions. The choice between the 2002 and 3001 depends on specific needs, with both options delivering exceptional performance and protection.