Niles Audio OS6.3, OS5.3 Tools and Materials Required, Wiring, Incorporating a Volume Control

Page 8

Installation Considerations

Tools and Materials Required

•Electric drill with 1/4- and 1/2-inch drill bits, and a 1-inch flat drill bit (for drilling through studs)

•Three screws or bolts suitable for the mounting surface

•The proper screwdriver for the mounting hardware

•Safety cable (optional)

•Cable ties

•Wire stripper

•Pencil

•Level

•Rubber gloves and protective eyewear

Wiring

The OS loudspeakers connect to your receiver or amplifier using 2-conductor loudspeaker wire (see Figure 3 on the next page). For most applications, we recommend using 16- or 18-gauge wire. For wiring runs longer than 80 feet, we recommend 14-gauge wire. The binding posts on OS loudspeakers accommodate up to 12-gauge wire directly. Larger sizes can be accommodated using spade, banana, or pin connectors.

TECH TIP

Wire size is expressed by its AWG (American Wire Gauge) number – the lower the number, the larger the wire. For example, 12 AWG is physically larger than 14 AWG.

When you run wire inside walls, outdoors or in marine installations, special jacketing or conduit is required for a trouble-free installation and conformation to the local and national building codes. If you are not sure of the correct wire jacket or type of conduit to use, consult a professional audio/ video installer, building contractor, or the local building and inspection department.

Incorporating a Volume Control

It’s possible to control the volume of the sound at the loudspeaker location. Plan to wire the system so that each pair of loudspeakers has its own volume control. Niles makes a wide range of indoor and outdoor volume controls with and without muting capabilities. Consult your local Niles dealer for more information. Volume controls are connected in line with the loudspeaker, so you must connect the wire from the amplifier to the volume control and then from the volume control to the loudspeaker (see Figure 4 on the next page).

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents OS7.3 OS6.3 OS5.3 Table of Contents Introduction Integrated Woofer/Baffle Assembly Mica-Filled Polypropylene Woofer ConeButyl-Rubber Woofer Cone Surround UltraSilk Dome TweeterRigid, Acoustically-Inert Cabinet All-Weather VersatilityHome Theater Applicability Integrated Mounting Bracket and Shelf StandParts Guide Niles Audio Corporation 1-800-BUY-HIFI Wiring Incorporating a Volume ControlInstallation Considerations Tools and Materials RequiredRecommended Amplifier Power Placing Loudspeakers for the Best Sound QualitySpeaker Placement Zone Placement for more bass output Mounting MethodsSafety First BracketPainting the Loudspeaker Tools RequiredPreparing to Paint Removing the grille using an awl Painting the Cabinet, Bracket KNOBS, and BracketPainting the Grille Replacing the GrilleInstallation Mounting the BracketAttaching the foot if using the loudspeaker Connecting the LoudspeakerChecking Loudspeaker Phase OPeration Listening at Higher VolumesCleaning Specifications OS 7.3 LoudspeakerNiles Audio Corporation 1-800-BUY-HIFI Limited Warranty Your Exclusive Remedies for Breach of WarrantyWarranty Registration Card Detach here and return to Niles Audio Corporation0 0 B U Y H I F I w w w . n i l e s a u d i o . c o m
Related manuals
Manual 2 pages 4.11 Kb

OS6.3, OS7.3, OS5.3 specifications

Niles Audio, a reputable name in the audio industry, has delivered exceptional outdoor speaker options with its OS series, specifically the OS7.3, OS6.3, and OS5.3 models. These speakers offer high-quality sound performance tailored for outdoor environments, making them perfect for patios, gardens, and poolside areas.

The OS7.3 speaker is designed as a high-performance, two-way outdoor speaker that features a robust 7-inch woofer for deep, rich bass response and a 1-inch tweeter for crisp, clear high frequencies. The speaker's weather-resistant construction ensures durability against harsh outdoor elements, allowing it to withstand rain, wind, and UV rays without compromising sound quality. Its power handling capability supports extensive volume levels, making it suitable for larger outdoor gatherings.

Similar in design, the OS6.3 model also features a two-way configuration, equipped with a 6.5-inch woofer and a 1-inch tweeter. This speaker strikes a perfect balance between size and sound performance, delivering impressive bass and detailed highs. The OS6.3 is ideal for medium to large outdoor spaces, providing a well-rounded audio experience that can fill larger areas without distortion.

The OS5.3 speaker serves as a more compact option, featuring a 5.25-inch woofer and a 1-inch tweeter. Despite its smaller size, the OS5.3 excels in delivering clear and powerful sound, making it an excellent choice for smaller patios or garden spaces. Its design emphasizes versatility and ease of installation, allowing for seamless integration into any outdoor setting.

All three models incorporate advanced technologies such as Niles’ patented technology that encourages enhanced sound dispersion, ensuring listeners can enjoy an immersive audio experience from various angles. The speakers utilize high-quality materials that contribute to their longevity, making them a solid investment for outdoor sound systems.

In conclusion, the Niles Audio OS7.3, OS6.3, and OS5.3 outdoor speakers impress with their unique characteristics and powerful capabilities. They embody a perfect blend of robust construction, exceptional sound quality, and innovative technology, making them ideal for any outdoor audio application. Whether for casual listening or hosting a lively gathering, these speakers offer a reliable solution for elevating outdoor audio experiences.
Top Page Image Contents