Weather-Proof, Construction | Niles Audio HD-525: 55 Hz to 21 kHz

HD-525/HD-650/HD-800High Definition Loudspeaker Group

FEATURESANDBENEFITS(CONTINUED)

Weather-Proof	gaps between the wall and the
Construction	frame. Additionally, the Niles
All of the drivers, the frames	mounting system is carefully
and the baffles are weather-	optimized to stiffen the sur-
proof. The aluminum grilles	rounding drywall and prevent it
are rustproof and the mounting	from resonating. You hear only
screws are all stainless steel.	the music, not the drywall.

point your remote control at the speaker with the MS-1 installed from up to 15 feet away.

X-Matrix™Reinforced

Baffle

The X-Matrix Baffle design uses

amplifiers. This allows many pairs of HD speakers to be wired to a single amplifier using a Niles speaker selection system.

Low Diffraction, Paintable Aluminum or Cloth Grilles

Absolutely Flush to the Wall Appearance

The unique mounting system of the HD loudspeakers powerful- ly clamps the frame to the bracket, sandwiching the wall material between them. Because the clamping action is totally uniform around the frame there are no shadows or

Infrared Sensor Mount

The speaker baffle has a locator designed for the Niles MS-1 MicroSensor,™ a miniature infrared sensor. The MS-1 installs discreetly behind the aluminum grille and therefore minimizes wall clutter in your home. When you want to con- trol your equipment, you simply

specially molded ribs to add rigidity to the baffle.The end result is better bass and improved midrange detail.

Six Ohm Impedance

HD speakers are designed to be placed in multi-room systems with many pairs of speakers. The six ohm impedance is a very easy electrical load for most

HD speakers are available with aluminum or cloth grilles. The painted rustproof aluminum grille has hundreds of precisely sized perforations, creating an acoustically transparent grille. The cloth grille is covered with a color coordinated acoustical- ly transparent cloth.

APPLICATIONNOTES

Model HD-800 Shown

Bracket	Wire ties on bracket
	keep wire attached
	throughout New
	Construction

Three Stage Installation System

Prevents Theft and Simplifies

Painting

You install only the parts you need for a particular stage of construction. When the framing and wiring are finished, you install the bracket. After the drywall is up, but before the painter begins to paint, you install the frame and provide the rustproof aluminum grilles to the painter so that they can be painted to match the

surroundings. Only when construction is completely finished do you put the valu- able speaker in the wall.

Easy Retrofit Installation

Designed for ease of installation, the Niles mounting system makes retrofit installations simple and fast. A supplied template assures fast and accurate hole cutting. The bracket slips behind the dry- wall and the screws secure the bracket to the frame, sandwiching the drywall

Wings areMounting Screws scored for

easy size trimming

IR Knockout

New Construction Wings instantly snap into the Bracket without screws

Frame slips into the bracket

The woofer, tweeter, crossover and the connection terminals are mounted to the Speaker Baffle

Grille

NILES NILES AUDIO CORPORATION

12331 S.W. 130 STREET MIAMI, FLORIDA 33186 ® TEL: (305) 238-4373 FAX: (305) 238-0185

www.nilesaudio.com

between them. The speaker baffle attach- es to the frame, and the grille mounts over the speaker.

Instant Speaker Changes

An MP or BG speaker can be substituted for the HD, if the frame size is identical (e.g. HD-525 to BG-525). You can quick- ly change the speaker by removing the grille, undoing the mounting screws and replacing just the speaker baffles.

Hole Saving Bracket

New Construction Wings allow the Bracket to be installed as a “Hole Saver” before the drywall goes up. The drywall contractor cuts the hole in the drywall as it is installed, reducing the chances of misplaced wire.

CEDIA

CUSTOM

ELECTRONIC

DESIGN &

INSTALLATION

ASSOCIATION

CHARTER MEMBER

©1999 Niles Audio Corporation. Note: Because Niles believes in constantly improving its products, Niles reserves the right to change product specifications without notice. Niles, the Niles logo and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation. Printed in USA DS00128A

HD-525: 55 Hz to 21 kHz, HD-800: 35 Hz to 21 kHz, HD-650: 45 Hz to 21 kHz specifications

Niles Audio is known for creating high-quality audio products that cater to both residential and commercial applications. Among their impressive lineup, the Niles HD series stands out, featuring models such as the HD-650, HD-800, and HD-525. Each of these speakers comes with distinct frequencies, advanced technologies, and features that make them ideal for various sound environments.

Starting with the Niles HD-650, this model boasts a frequency response of 45 Hz to 21 kHz. This wide frequency range ensures that you can enjoy deep bass as well as clear treble, making it ideal for audiophiles who appreciate rich sound quality. The HD-650 incorporates a robust weather-resistant design, allowing it to perform exceptionally well in outdoor settings. Its 6.5-inch polypropylene woofer and 1-inch tweeter work in tandem to deliver a full spectrum of sounds without distortion.

Next up is the Niles HD-800, which takes things a step further with a frequency response that ranges from 35 Hz to 21 kHz. With an emphasis on lower frequencies, this model ensures a powerful bass response, making it perfect for those who enjoy watching movies or listening to music with deep undertones. The HD-800 features a 8-inch polypropylene woofer and a 1-inch aluminum tweeter, providing a balanced soundstage and enhanced clarity. This speaker is also engineered with advanced crossover technologies to deliver seamless integration between the woofer and tweeter, resulting in an immersive audio experience.

The HD-525 rounds out the lineup with a frequency response of 55 Hz to 21 kHz. It is designed for versatility, making it suitable for both background music and critical listening. Its 5.25-inch aluminum cone woofer and 1-inch tweeter deliver a wide range of sound reproduction, ensuring clarity and detail. The HD-525 is engineered with Niles' unique technologies, including low dispersion design, which minimizes nodal points and maximizes coverage across the listening space.

All three models utilize Niles’ commitment to high-performance audio technologies, including robust construction materials that enhance durability and performance. The speakers are designed for ease of installation and come with mounting hardware for versatile positioning. Overall, the Niles Audio HD series represents an excellent choice for anyone looking to elevate their audio experience, whether indoors or outdoors.