Ei Electronics Ei 405C, Ei 405TYC manual RF Reception

Page 21

RF RECEPTION

External Alarm

RF Signal: Turns on horn without red light flashing until it fails to receive alarm confirmation for 11 seconds. Stops horn within 3 sec- onds, on receipt of an "Alarm "Cancel" sig- nal (from any unit). Receiver remains on "continuously" for 11 seconds to check for further alarm signals.

Length of

Program Mode: 15 minutes

Remote Test Button: Turns on test button so red light flash, I/O

(Keyfob Ei410) line high. No RF message sent by smoke alarm

Remote Hush:

It silences its horn for ten minutes

(Keyfob Ei410

 

Remote Locate:

Stops smoke alarm sounding unless it is in

(Keyfob Ei410)

local alarm itself i.e. detecting smoke

RF VISUAL INDICATOR (BLUE)

Test Button: Blue light indicates test button pressed.

On Transmission: Blue LED lights continuously for 1.5 to 3.5 seconds while messages are being

 

transmitted

Low Battery

 

Indication:

Unit beeps and red light flashes every 40

 

seconds. On Ten Year battery units,

 

Ei405TY, blue LED also flashes every 9

 

seconds if radio battery is low

Size of System:

A maximum number of 32 units can com-

 

municate together on one system (howev-

 

er the range is likely to be the limiting fac-

 

tor in many cases)

Communication:

All units will communicate together as

 

shipped (units uncoded). After a unit has

 

been programmed it will only communi-

 

cate with units whose serial numbers it

 

has learned (i.e. is house coded)

Entering Program

 

Mode:

Pressing the test button three times within

 

1.5 seconds puts the smoke alarm in pro-

 

gram mode.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents All with Optical Smoke Sensor1 Radio Smoke AlarmsRead this First Introduction Single Storey Dwelling Locating Your Smoke AlarmRecommended locations, Figures 2, 3 For minimum protection For recommended protectionMulti Storey Dwellings Single storey dwellingChecking you can hear your Smoke Alarm Positioning Your Smoke AlarmRecommended Protection Wall MountingNuisance/False Alarms On a sloping CeilingLocations to Avoid Installing Your Smoke Alarms Looking After Your Smoke AlarmsManually Testing your Smoke Alarm House Coding your Units Checking the Wireless InterconnectProgram Procedure Troubleshooting RF InterconnectionAdditional Units Test RF Remote Control Ei 410 OptionalHush LocatePower Indicator Light Hush FeatureCleaning your Smoke Alarm Automatic Self-Test Replacing the Battery Model Ei 405 & Ei405C onlyDust & Insect Contamination End of lifeHardwire Interconnection Important Safeguards Limitations of Smoke Alarms Planning Your Escape Route for When the Alarm Goes OFF Fire Safety Hints What is the Best Smoke Alarm Optical or Ionisation ?Home Office states in FB2 Getting Your Smoke Alarm ServicedRF & EMC Technical SpecificationRF Reception Blue light will turn on as the button is

Ei 405C, Ei 405TYC, Ei 405TY specifications

Ei Electronics has established itself as a leading brand in the field of smoke alarms and carbon monoxide detectors. Among its impressive lineup, the Ei 405TY, Ei 405TYC, and Ei 405C models stand out for their innovative design and advanced technologies, ensuring safety in residential and commercial environments.

The Ei 405TY model is a premium smoke alarm that utilizes a state-of-the-art optical sensing technology. This technology enhances the alarm's ability to detect slow-burning fires, such as those caused by smoldering materials. One of the primary features of the Ei 405TY is its high-performance photoelectric chamber, which minimizes false alarms while maximizing fire detection reliability. It is equipped with an intelligent feature that allows for a resettable alarm, providing peace of mind in everyday situations. The alarm also produces a clear, loud alert, ensuring that occupants are promptly notified in case of danger.

The Ei 405TYC model builds upon the features of the Ei 405TY but adds a significant layer of versatility with its built-in carbon monoxide detection capability. This dual-functionality allows for comprehensive protection against both smoke and carbon monoxide, a colorless and odorless gas that poses serious health risks. The Ei 405TYC incorporates advanced microcontroller technology, which ensures accurate detection and notifications for varying levels of CO concentration. Additionally, it features a visual indicator that provides information about the alarm's operational status, enhancing its user-friendliness.

The Ei 405C model is designed for those seeking a reliable and straightforward smoke detection solution. It employs the same optical sensing technology found in the Ei 405TY but without the carbon monoxide detection feature. This model excels in smaller spaces, where it serves effectively as a dedicated smoke alarm. Its easy installation and maintenance are supported by a user-friendly design, making it an ideal choice for homeowners or property managers looking for a cost-effective safety solution.

All three models are designed with long-lasting battery life, ensuring they remain functional even during power outages. Additionally, they feature a tamper-proof design to prevent accidental removal. The Ei Electronics alarms are compliant with international safety standards, emphasizing the brand's commitment to quality and reliability in personal safety. Overall, the Ei 405TY, Ei 405TYC, and Ei 405C models represent a blend of advanced technology and practical features, providing essential fire and carbon monoxide detection for peace of mind in any environment.
Top Page Image Contents