Where to Place CO Alarms | Ei Electronics Ei 205EN, Ei 205CEN

B15583/R0/204EN&205EN/U&C 8/6/06 1:54 PM Page 10

Reset Memory by holding down the test button for over 20 seconds until the red light stops flashing. Cover the horn with a cloth to muffle the alarm during this time.

Please note that the memory will also be reset when the unit is unpowered.

4.WHERE TO PLACE CO ALARMS

4.1Ideally a Carbon Monoxide Alarm should be installed in:

-Every room containing a fuel burning appliance, and

-Remote rooms where occupants spend a considerable amount of time

-Every bedroom.

However if the number of Carbon Monoxide Alarms is limited, the following points should be considered when deciding where best to fit the alarm(s)

-If there is an appliance in a room where people sleep, place a CO Alarm in this room and

-Locate a CO alarm in a room containing a flueless or open-flued appliance, and

-Locate an alarm in a room where the occupant(s) spend most of their time (e.g. sitting room) and

-In a bedsit, the CO alarm should be placed as far away from the cooking appliance as possible, but near to where the person sleeps and

-If the appliance is in a room not normally used, such as a boiler room, the CO alarm should be placed just outside the room so that the alarm will be heard more easily.

Ei 204EN, Ei 205EN, Ei 205ENA, Ei 205CEN specifications

Ei Electronics has established a strong reputation in the field of home safety, particularly with its innovative range of smoke alarms and detectors. Among its flagship products are the Ei 205CEN, Ei 205EN, Ei 205ENA, and Ei 204EN models, each featuring advanced technologies designed to provide reliable and effective fire safety solutions.

The Ei 205CEN is a high-performance optical smoke alarm. Its unique design incorporates a state-of-the-art photoelectric sensing technology that enhances its ability to detect slow-burning fires, such as those caused by smoldering materials. This model features a sealed lithium battery that ensures longevity and requires minimal maintenance. Additionally, it is equipped with a test and hush button for user convenience.

The Ei 205EN model takes safety a step further, offering both smoke and carbon monoxide detection capabilities. This dual-functionality makes it an ideal choice for households concerned about the dangers posed by both smoke and toxic gases. The Ei 205EN utilizes the same photoelectric sensing technology as the Ei 205CEN, ensuring rapid response to threats. Moreover, it has an easy-to-read LED indicator that provides visual feedback on the status of the unit, enhancing user awareness.

Building on the features of the Ei 205EN, the Ei 205ENA includes an added benefit of an emergency escape light. This model provides not only smoke and carbon monoxide detection but also illumination during power outages, guiding residents to safety in critical situations. Its intelligent design ensures that the escape light activates automatically when the alarm is triggered, providing peace of mind during emergencies.

Lastly, the Ei 204EN model is designed primarily for smoke detection, utilizing an enhanced photoelectric sensor that minimizes false alarms while maintaining high sensitivity to legitimate threats. This model is particularly suited for areas where unwanted alarms can be disruptive, such as kitchens and living rooms.

Each model in the Ei Electronics lineup is engineered with user-friendly features including clear audio alerts, easy installation, and battery backup options. Collectively, these devices contribute to a comprehensive home safety system that prioritizes user protection and peace of mind. With a commitment to reliability and innovation, Ei Electronics continues to lead the way in smoke and carbon monoxide detection technology.