4 Wire Ties
Figure 10. The hole-saving brackets with QuickSnap new-construction wings can be installed horizontally or vertically.
2.Screw one side of the assembled bracket with wings to the stud or joist, using one of the supplied screws. Level the bracket, and then screw the other side of the bracket/wing assembly to the stud or joist. Two screws on each side make for a very secure installation.
3.Attach the wire to the bracket at the indicated wire tie points, as shown in Figure 10.
CONCEALING SPEAKER WIRE FOR A FUTURE INSTALLATION
1.Attach the speaker wire in a loop between the ceiling joists and carefully mark the
exact location of the wire on a set of plans.
2.Ask the general contractor to inform the drywall installers that the speaker wire loops are concealed for future installations, as shown in
Figure 11.
Figure 11. The speaker wire is looped and hung on two nails attached to the joists, securing it for future use. Be sure to note the location on house plans.
NILES AUDIO CORPORATION – |
| 15 |
|