Carrier 48/50HG014-028, 48/50PG20-28 Supply Air Smoke Detector Installation CRSMKSUP001D00

Page 5

SAMPLING TUBE

SUPPORT BRACKET

CRSMK

C07176

Fig. 5 ---Sampling Tube Support Bracket

PL19

CUT OFF CONNECTOR, LABELED TB3-5, ON ORN WIRE

C07177

Fig. 6 ---Return and Supply Air Smoke Detector Wiring on ComfortLink Units

Supply Air Smoke Detector Installation (CRSMKSUP001D00)

The supply air smoke detector is to be installed in the predrilled holes located on the front of the first indoor blower. (See Fig. 9.)

!WARNING

ELECTRICAL SHOCK HAZARD

Failure to follow this warning could result in personal injury and/or death.

Prior to installation of this accessory, make sure all power is disconnected to the unit and locked out and tagged.

1.Open the indoor fan access door and secure.

2.Open and secure hinged electrical/compressor access door.

3.Disconnect wires located on the right-hand side of the fan deck. On gas heat units, the indoor fan plug and the limit switch quick connects must be disconnected. On units without gas heat, only the indoor fan plug must be disconnected.

4.Find the 2 plugs located in the blower side plate. Remove the plugs and discard. It will be necessary to remove some of the tape holding the plugs in place.

5.Remove cover from smoke detector. The screws will remain captured in the cover.

5

Image 5
Contents General Table of ContentsSafety Considerations Return Air Smoke Detector Installation CRSMKDET001D00 InstallationCheck Package Contents Smoke Detector Supply and Return Sensor Tube Sampling Tube Support Bracket Supply Air Smoke Detector Installation CRSMKSUP001D00Smoke Detector Wiring on Electro-Mechanical Control Units Make sure sampling tube holes are aligned facing UP Sensor Installation CRSMKSEN001A00Operation Configuring the ComfortLinkt ControllerRecommended Service Schedule MaintenanceCleaning Procedure Sensor TestsPower LED TroubleshootingDirty LED Trouble LED

48/50PG20-28, 48/50HG014-028 specifications

The Carrier 48/50HG014-028 and 48/50PG20-28 are part of Carrier's extensive lineup of commercial and industrial HVAC systems, designed for optimal performance, energy efficiency, and reliability. These units are particularly known for their robust construction and advanced technology, making them suitable for a variety of applications, including large commercial buildings, manufacturing centers, and other facilities that require consistent climate control.

One of the key features of the Carrier 48/50HG units is their high-efficiency scroll compressors, which not only enhance performance but also significantly reduce energy consumption. These compressors are designed to maintain efficiency across a wide range of operating conditions, providing reliable cooling and heating year-round. Additionally, the units are equipped with advanced microprocessor controls that allow for precise temperature regulation and system diagnostics, optimizing energy use and simplifying maintenance.

The 48/50HG and 48/50PG models also boast a compact design, making installation easier, especially in spaces with limited access. Their lightweight construction and modular components enable quick and efficient service, an essential feature for businesses that cannot afford prolonged downtimes. The units come with a comprehensive range of factory-installed options, including variable-speed fans and advanced economizer systems that increase indoor air quality while reducing operational costs.

Noise reduction technology is another significant characteristic of these units. They are designed with sound-dampening features that minimize operational noise, which is particularly beneficial for urban environments or noise-sensitive applications. In addition, the units meet or exceed standard regulatory requirements for efficiency and emissions, further enhancing their appeal in an increasingly eco-conscious market.

Moreover, the Carrier 48/50HG and 48/50PG series incorporate environmentally friendly refrigerants with low Global Warming Potential (GWP), aligning with Carrier's commitment to sustainability. This approach not only complies with current environmental regulations but also prepares users for future mandates regarding refrigerant use.

In conclusion, the Carrier 48/50HG014-028 and 48/50PG20-28 series are engineered to deliver exceptional performance, energy efficiency, and reliability. Their combination of advanced technologies, ease of maintenance, and commitment to sustainability makes them a top choice for businesses seeking effective climate control solutions. With a focus on innovation and customer satisfaction, Carrier continues to set the standard in the HVAC industry.